Home ReviewsRefund
Home/Audi/A8/Audi A8 D3 рестайлинг (2005-2007)/Repair manual/Electrical Equipment/Steering Angle Sensor, Removing and Installing
Contents Section: Electrical Equipment All sections

Steering Angle Sensor, Removing and Installing Audi A8 D3 рестайлинг

Electrical Equipment 1 illustration

Steering Angle Sensor, Removing and Installing

Removing

Scheme 246

Scheme 246: Steering Angle Sensor, Removing and Installing
Scheme 246: Steering Angle Sensor, Removing and Installing
  1. Remove Airbag Spiral Spring/Return Spring With Slip Ring --> «Airbag Spiral Spring/Return Spring With Slip Ring, Removing and Installing»(/audi/a8/d3-2005-2007/remont/cruise-control-systems/#electrical-equipment__airbag-spiral-springreturn-spring-with-slip)
  2. Remove Steering Angle Sensor G85 - 1 - - arrow -.

Installing

Install in reverse order.

  1. After replacing steering angle sensor G85 , it must be calibrated via "Guided Functions".