Home ReviewsRefund
Home/Audi/A8/Audi A8 D2 facelift (1999-2002)/Repair manual/Automatic Trans/Servicing - A/t (01L, Awd): Adjustments
Contents Wiring diagrams Section: Automatic Trans All sections

Servicing - A/t (01L, Awd): Adjustments Audi A8 D2 facelift

Automatic Trans

Adjustments

  1. Move selector lever to "P" position. Move selector lever on transmission to "P" position (rear-most position). Parking brake must engage.
  2. Slightly loosen mounting bracket-to-transmission bolts (C). (Схема №21) Ensure selector lever cable is free of tension. Relieve tension if necessary.
  3. Tighten bracket mounting bolts (C) to specification. See «TORQUE SPECIFICATIONS»(ref-8558-S20359619212000091100000). Check selector lever controls. See «SELECTOR LEVER CONTROLS»(ref-8558-S28373582932005012400000) under INSPECTION.

More articles — Servicing - A/t (01L, Awd)