Home ReviewsRefund
Home/Audi/A6/Audi A6 C5 рестайлинг (2001-2004)/Repair manual/Multiport Fuel Injection (mfi) - 3.0l v6 Avk/Installing
Contents Section: Multiport Fuel Injection (mfi) - 3.0l v6 Avk All sections

Installing Audi A6 C5 рестайлинг

Multiport Fuel Injection (mfi) - 3.0l v6 Avk ~164 words

Installing

Install in reverse sequence; note the following points

Note. The following steps need to be performed after connecting the new engine control module

  1. Check Diagnostic Trouble Code (DTC) memory and erase, if necessary. See «DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING»(/audi/a6/c5-2001-2004/remont/testing-diagnostics/#on-board-diagnostic-obd-30l-v6-avk__diagnostic-trouble-code-dtc-memory-checking) .
  2. Observe notes for coding new Engine Control Module (ECM). See «ENGINE CONTROL MODULE (ECM), CODING»(/audi/a6/c5-2001-2004/remont/testing-diagnostics/#on-board-diagnostic-obd-30l-v6-avk__engine-control-module-ecm-coding) .
  3. For vehicles with cruise control (discernible at steering column), switch this free in ECM. See «CRUISE CONTROL SYSTEM (CCS), ACTIVATING/DEACTIVATING»(/audi/a6/c5-2001-2004/remont/testing-diagnostics/#on-board-diagnostic-obd-30l-v6-avk__cruise-control-system-ccs-activatingdeactivating) .
  4. Check whether the hot country function (activation of after -run coolant pump) is activated in Function "11 - Coding II". See «HOT-COUNTRY FUNCTION, ACTIVATING / DEACTIVATING»(/audi/a6/c5-2001-2004/remont/testing-diagnostics/#on-board-diagnostic-obd-30l-v6-avk__hot-country-function-activating-deactivating) .
  5. Perform adaptation of the Throttle Valve Control Module -J338-. See «THROTTLE VALVE CONTROL MODULE, ADAPTATION»(/audi/a6/c5-2001-2004/remont/cruise-control-systems/#multiport-fuel-injection-mfi-30l-v6-avk__throttle-valve-control-module-adaptation) .
  6. For vehicles with automatic transmission, the kick down function must be adapted. See «KICKDOWN FUNCTION, ADAPTATION»(/audi/a6/c5-2001-2004/remont/cruise-control-systems/#multiport-fuel-injection-mfi-30l-v6-avk__kickdown-function-adaptation) .
  7. Activate the engine control module via the "Guided troubleshooting" function (diagnosis object "Replacing engine control module").
  8. Generate readiness code. See «READINESS CODE, GENERATING»(/audi/a6/c5-2001-2004/remont/testing-diagnostics/#on-board-diagnostic-obd-30l-v6-avk) .