Home ReviewsRefund
Home/Audi/A4/Audi A4 B6 (2000-2006)/Repair manual/Maintenance/All models
Contents Wiring diagrams Section: Maintenance All sections

All models Audi A4 B6

Maintenance 1 illustration

All models

  1. Remove oil filter.

Note. Observe environmental requirements for disposal.

  1. Remove oil drain plug or extract engine oil.
  2. Clean sealing surface on engine for oil filter.
  3. Lightly oil rubber seal.

Note. Note the installing instructions on the oil filter.

Scheme 113

Scheme 113
Scheme 113
  1. Screw in new filter and tighten.
CAUTIONAfter exchanging the oil filter cartridge check the free movement of the hoses leading away from the oil cooler - arrows- to the connecting components and, if necessary, correct the oil filter position.
  1. Screw in oil drain plug with new sealing ring.
  2. Fill engine oil. See «OIL SPECIFICATIONS»(/audi/a4/b6-2000-2006/remont/procedures/#maintenance__oil-specifications) .
  3. Observe instructions for turbo engines. See «ENGINES WITH TURBOCHARGER»(/audi/a4/b6-2000-2006/remont/procedures/#maintenance__engines-with-turbocharger) .
Tightening torquesFt lbsNm
4-cyl. gasoline engines2230
6-cyl. gasoline engines2230

TORQUE SPECIFICATIONS: ENGINE OIL DRAIN PLUG