Home/Volvo/XC90/Volvo XC90 I рестайлинг (2006-2014)/Repair manual/Steering - Removal, Replacement and Installation/RETURN HOSE, REPLACING

Contents

Section: Steering - Removal, Replacement and Installation

PREPARATORY WORK

FINISHING

PREPARATIONS

INSTALLING THE STEERING GEAR

INSTALLING THE METAL PROTECTIVE COVER

INSTALLING THE OIL PIPES TO THE STEERING GEAR

INSTALLING THE SUBFRAME AT THE REAR EDGE

FITTING THE LOWER BOLT TO THE REAR ENGINE PAD

INSTALLING THE STEERING ARMS TO THE WHEEL SPINDLES

INSTALLING THE EXHAUST PIPES BETWEEN FRONT AND REAR CATALYTIC CONVERTERS

INSTALLING THE PROTECTIVE COVER UNDER THE ENGINE

FITTING THE BOLTS TO THE ENGINE PAD, RIGHT

INSTALLING THE WING LINER

REMOVING THE LIFTING TOOL

STEERING COLUMN, REPLACING

REMOVING COMPONENTS

INSTALLING THE STEERING COLUMN

INSTALLING THE LOWER STEERING SHAFT JOINT

INSTALLING THE CABLE FOR IGNITION SWITCH INTERLOCK (VEHICLES WITH AUTOMATIC TRANSMISSIONS ONLY).

INSTALLING THE STEERING WHEEL LOCK MODULE

INSTALLING STEERING COLUMN COVERS

INSTALLING THE STEERING WHEEL

STEERING SHAFT, LOWER, REPLACING

REMOVING WHEELS

FITTING THE WHEEL

STEERING WHEEL LOCK, REPLACING

PREPARATION

INSTALLING THE CONNECTORS ON THE STEERING WHEEL MODULE (SWM)

INSTALLING THE MECHANICAL CABLE FOR THE IGNITION SWITCH INTERLOCK (ONLY APPLIES TO CARS WITH AUTOMATIC TRANSMISSIONS)

ORDERING SOFTWARE / KEYS

STEERING WHEEL MODULE (SWM)

PROGRAMMING THE CONTROL MODULE

STEERING WHEEL, REPLACING

REPLACING

SOUNDPROOFING PANEL

ORDERING SOFTWARE

STEERING WHEEL MODULE (SWM), REPLACING

CONTROL MODULE STEERING GEAR, REPLACING

FINISHING WORK

LIMITERS, REPLACING

REPLACING THE OUTER STEERING ARM

INSTALLING THE STEERING ARM

REMOVING

INSTALLING

STEERING ARM INNER, REPLACING

INSTALLING THE INNER STEERING ARM

STEERING GEAR, REPLACING

REMOVING THE SCREW ON THE LOWER STEERING SHAFT

REMOVING THE SUB-FRAME

REMOVING THE TRACK ROD ENDS

REMOVING STEERING GEAR

INSTALLING STEERING GEAR

INSTALLING THE RETURN LINE AND DELIVERY LINE

INSTALLING THE SUB-FRAME

INSTALLING THE SCREW ON THE LOWER STEERING SHAFT

REMOVING THE RETURN LINES AND DELIVERY LINE

HYDRAULIC PIPES/HOSES STEERING GEAR, REPLACING

INSTALLING THE RETURN HOSE

REPLACING THE STEERING GEAR

INSTALLING THE OIL COOLER

INSTALLING THE POWER STEERING PUMP

AUXILIARIES BELT / BELT TENSIONER, REPLACING

PULLEY POWER STEERING PUMP, REPLACING

OIL COOLER STEERING GEAR, REPLACING

POWER STEERING PUMP, REPLACING

REMOVING DRIVE BELT

INSTALLING THE PRESSURE HOSE

INSTALLING DRIVE BELT

INSTALLING THE SUPPLY PIPE / HOSE

INSTALLING DELIVERY LINES

RETURN HOSE, REPLACING

REMOVING THE RETURN PIPE

INSTALLING RETURN PIPE

REMOVING THE PRESSURE HOSE

REMOVING THE POWER STEERING PUMP

REMOVING THE DELIVERY LINES

REMOVING THE RETURN HOSE

OIL COOLER, POWER STEERING

POWER STEERING PUMP

INSTALLING THE LIFTING TOOL

REMOVING THE WING LINER

REMOVING THE BOLTS TO THE RIGHT-HAND ENGINE PAD

REMOVING THE PROTECTIVE COVER UNDER THE ENGINE

REMOVING THE EXHAUST PIPES BETWEEN FRONT AND REAR CATALYTIC CONVERTERS

REMOVING THE LOWER BOLT TO THE REAR ENGINE PAD

REMOVING THE LOWER STEERING SHAFT JOINT

LOWERING THE SUBFRAME

REMOVING THE RETURN PIPE, CONTINUED

INSTALLING THE RETURN PIPE

INSTALLING THE SUBFRAME

FITTING THE LOWER BOLT TO THE FRONT ENGINE PAD

INSTALLING THE PROTECTIVE PLATE

FITTING THE BOLTS TO THE RIGHT-HAND ENGINE PAD

POWER STEERING DELIVERY PIPE

DELIVERY PIPES/HOSE STEERING GEAR, REPLACING

REMOVING THE ENGINE CASING

REMOVING THE PROTECTIVE PLATE

REMOVING THE LOWER BOLT TO THE FRONT ENGINE PAD

REMOVING THE STEERING SHAFT JOINT, LOWER

REMOVING THE PRESSURE PIPE, CONTINUED

INSTALLING THE PRESSURE PIPE

INSTALLING THE STEERING SHAFT JOINT, LOWER

INSTALLING THE PROTECTIVE COVER OVER THE POWER STEERING PUMP

REMOVING THE INTAKE MANIFOLD.

REMOVING THE AUXILIARIES BELT/BELT TENSIONER

INSTALLING THE AUXILIARIES BELT/BELT TENSIONER

INSTALLING THE INTAKE MANIFOLD

REPLACING POWER STEERING PUMP PULLEY

REMOVING PULLEY

INSTALLING PULLEY, ALTERNATIVE 1

INSTALLING PULLEY, ALTERNATIVE 2

All sections

RETURN HOSE, REPLACING Volvo XC90 I рестайлинг

Steering - Removal, Replacement and Installation 1 illustration

RETURN HOSE, REPLACING

Note. The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.

Remove the battery lead. See BATTERY, DISCONNECTING .

Install lock grip pliers on the feeder hose for the power steering pump.

Remove the sub-frame. See: SUB-FRAME FRONT, REPLACING (2003-2006) or SUB-FRAME FRONT, REPLACING (2007) .

Scheme 119

Scheme 119: REMOVING THE RETURN HOSE

Scheme 119: REMOVING THE RETURN HOSE

Remove

the clamp for the oil cooler return hose
the return hose.