INSTALLING Volvo XC90 I рестайлинг

INSTALLING

Note. Check carefully that there are no impurities.

Change the filter in the steering gear to the new one included in the kit.

Lube the solenoid's seals with some oil.

Note. Only use Volvo power steering fluid, part number 30741424 (1 liter).

Install the solenoid with the new screws, 2 pcs., included in the kit and tighten alternately to contact.

Tighten in the following order

Step 1. (1) 0.5 Nm

Step 2. (2) 1.5 Nm

Step 3. (1) 2.9 Nm

Step 4. (2) 2.9 Nm

Plug in the connector for the solenoid.

Install

1. any protective casings
2. the wheel. See «INSTALLING WHEELS»(ref-476812-S05651003162012060500000) .

Check the oil level in the power steering fluid reservoir, top up if necessary.

Bleed the power steering system.

Note. Only use Volvo power steering fluid, part number 30741424 (1 liter).

Start the engine and turn the steering wheel slowly back and forth to the end-positions.

Move the vehicle after a few turns of the steering wheel to prevent generating wear marks on the tires.

Check the oil level again.