Heated oxygen sensor (HO2S), replacing
Special tools
9995543
Note. The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential information in the illustrations is always correct.
Replacing the heated oxygen sensor
Detach the wiring harness from the clip.
Scheme 341
Unplug the connector of the heated oxygen sensor.
Scheme 342
Remove the heated oxygen sensor. Use 9995543
Installing the heated oxygen sensor
Install
- the heated oxygen sensor. Use «9995543»(ref-403953-S02065961212011061000000) . Tighten.
- the wiring harness in the clip.
Plug in the connector of the heated oxygen sensor
Induction pipe, replacing
Operation Number(s): 25102-2
Disconnect power steering pump
Disconnect power steering pump Power steering pump
Scheme 343
Scheme 344
Scheme 345
Scheme 346
Scheme 347
Scheme 348
Scheme 349
Scheme 350
Install the pump power steering
Install pump power steering Power steering pump
Fill the cooling system
Perform filling Cooling system - draining, charging and bleeding