Reading off the parameter values
Using this function, the status or value of parameters can be read off. The status/value is presented digitally.
For further information about the different parameters, see: Description of parameters
This function can be used to activate components and functions which affect the outputs of the central electronic module (CEM).
For further information, see: Description of activations
This function allows programmed data to be read off or data such as customer parameters to be programmed in.
Note. If possible, all data must be read out from the control module before replacement. After replacement the relevant data must be programmed into the new control module. The data must be read off before the control module is replaced. This is so that the same information can be programmed in to the new control module.