Note. Removal steps in this procedure may contain installation details.
Scheme 12
Scheme 13
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 14
Scheme 15
Torque: M6
10 Nm
Scheme 16
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 17
Scheme 18
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Remove battery. See BATTERY (2007-09) or BATTERY (2010)
Scheme 19
Torque: M6
10 Nm
Scheme 20
Scheme 21
Torque: M6
10 Nm
To install, reverse the removal procedure.
Note. Removal steps in this procedure may contain installation details.
Scheme 22
Remove the plenum cover. See PLENUM CHAMBER (2007-10) or PLENUM CHAMBER (2011-12)
Scheme 23
Scheme 24
Note. Make sure that the component terminals are not bent or damaged.
Scheme 25
Torque: M6
10 Nm
To install, reverse the removal procedure.
Order and download software according to 30785202
Note. Removal steps in this procedure may contain installation details.
Remove the plenum cover. See PLENUM CHAMBER (2007-10) or PLENUM CHAMBER (2011-12)
Torque: M6
10 Nm
To install, reverse the removal procedure.
Order and download software according to 30785202
Perform draining. See COOLING SYSTEM - DRAINING, CHARGING AND BLEEDING
Scheme 26
Scheme 27
To install, reverse the removal procedure.