DESCRIPTION OF READING OFF EXTENDED DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION
Contents
Select type of description
- see «DESCRIPTION OF FROZEN VALUES»(ref-517841-S02450567832012121400000)
- see «DESCRIPTION OF STATUS IDENTIFIER»(/volvo/s80/ii-2006-2010/remont/oem-general-information/#diagnostic-trouble-code-dtc-counter-description-and-operation__description-of-status-identifier)
- see «DESCRIPTION OF COUNTER»(/volvo/s80/ii-2006-2010/remont/oem-general-information/#diagnostic-trouble-code-dtc-counter-description-and-operation__description-of-counter)
DESCRIPTION OF FROZEN VALUES
EXPLANATION
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored.
Not all parameters can be read off for all diagnostic trouble codes (DTCs). The parameter values can only be read off where they can provide more information about the prevailing circumstances when the diagnostic trouble code (DTC) was stored.
GLOBAL TIME
The value shows the time since the Central Electronic Module (CEM) was supplied with voltage the first time. Transmission Control Module (TCM) obtains the value via the CAN-net from Central Electronic Module (CEM). The value is given in minutes.
TOTAL MILEAGE, VALUE
Measurement range: 0 -16, 777, 215 km.
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.
MECU POWER SUPPLY, VALUE
Measurement range: 0 - 63 V
Normal range: 12.0 - 14.5 V
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.
PASSENGER COMPARTMENT TEMPERATURE, VALUE
Measurement range: -40 to +215 °C.
The value indicates the passenger compartment temperature when the diagnostic trouble code (DTC) was stored.
POWER SUPPLY POSITION, STATUS (BEFORE STRUCTURE WEEK 201046)
The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.
- Key removed
- Key recently removed
- Key approved
- Ignition off after Accessory position
- Accessory position
- Accessory position after Ignition on
- Ignition on
- Running
- Start attempt
- Signal missing
POWER SUPPLY POSITION, STATUS (AFTER STRUCTURE WEEK 201046)
The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.
- Key removed
- Key recently removed
- Key approved
- Ignition off after Accessory position
- Accessory position
- Accessory position after Ignition on
- Ignition on
- Combustion engine running
- Combustion engine in auto-stop
- Combustion engine in start attempt
- Combustion engine in start attempt at manual start
ECU POWER SUPPLY
Measurement range: 0 - 25.5 V.
Indicates the supply voltage to the Closing velocity module (CVM) when the diagnostic trouble code (DTC) was stored.
INTERNAL TEMPERATURE, VALUE
Measurement range: -40 to 215 °C.
Indicates the internal temperature in the Closing velocity module (CVM) when the diagnostic trouble code (DTC) was stored.
VEHICLE SPEED
Indicates the vehicle speed (km/h) when the diagnostic trouble code was stored. In the event of a negative value, reverse gear was engaged when the diagnostic trouble code was stored.
DESCRIPTION OF READING OFF EXTENDED DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION (2009, 2010)
see DESCRIPTION OF FROZEN VALUES
DESCRIPTION OF READING OFF EXTENDED DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION (2011)
see DESCRIPTION OF FROZEN VALUES
DESCRIPTION OF READING OFF EXTENDED DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION (2012)
see DESCRIPTION OF FROZEN VALUES
DESCRIPTION OF PARAMETERS
see DESCRIPTION OF PARAMETERS
see DESCRIPTION OF READING OFF EXTENDED DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION (2009, 2010)
DESCRIPTION OF READING OFF OF EXTENDED DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION
Select type of description
EXPLANATION
Frozen values are parameter values that are stored when a diagnostic trouble code (DTC) is stored. Not all parameters can be read off for all diagnostic trouble codes (DTCs). The parameter values can only be read off where they can provide more information about the prevailing circumstances when the diagnostic trouble code (DTC) was stored.
GLOBAL TIME, VALUE
The value indicates the time since the central electronic module (CEM) was first powered. The value is given in seconds.
TOTAL MILEAGE, VALUE
Measurement range: 0-1, 000, 000 km
The value indicates the vehicle's total mileage when the Diagnostic Trouble Code (DTC) was generated.
MECU POWER SUPPLY, VALUE
Measurement range: 0-63 V
Normal range: 12.0 - 14.5 V
The value indicates the supply voltage to the central electronic module (CEM) when the diagnostic trouble code (DTC) was stored.
PASSENGER COMPARTMENT TEMPERATURE, VALUE
Measurement range: -40 to +215 °C
The value indicates the passenger compartment temperature when the diagnostic trouble code (DTC) was stored.
OUTSIDE TEMPERATURE, VALUE
Measurement range: -40 to +215 °C
The value indicates the outside temperature when the diagnostic trouble code (DTC) was stored.
POWER SUPPLY POSITION, STATUS
The value indicates the current status of the power supply position when the diagnostic trouble code (DTC) was stored.
Key removed
Key recently removed
Key approved
Ignition off after Accessory position
Accessory position
Accessory position after Ignition on
Ignition on
Running
Start attempts
Signal missing