Home ReviewsRefund
Home/Volvo/S40/Volvo S40 I рестайлинг (1999-2004)/Repair manual/Engine Control Systems/Engine - Inspection and Adjustment (644 Body): Specificatio…
Contents Section: Engine Control Systems All sections

Engine - Inspection and Adjustment (644 Body): Specifications Volvo S40 I рестайлинг

Engine Control Systems 3 illustrations ~141 words

Tightening the timing gear pulley

See Tightening timing gear pulley.

Scheme 73

Scheme 73: Check
Scheme 73: Check
  1. Press the belt to check that the indicator on the tensioner moves easily
  2. Position the upper timing cover.

Scheme 74

Scheme 74
Scheme 74
  1. Turn the crankshaft two turns. Check that the markings on the crankshaft and camshaft pulley correspond. NOTE: Check that the indicator on the belt tensioner is within the marked area.
  2. Remove the upper timing cover.

Scheme 75

Scheme 75: Installing the right engine mounting
Scheme 75: Installing the right engine mounting

Screw the engine mounting onto the engine. Tighten to 67 Nm .

Install the engine mounting screw and nut in the bodywork bracket. Tighten by hand.

Timing gear pulley, tightening

See Tightening timing gear pulley.

See Tightening timing gear pulley.

More articles — Engine - Inspection and Adjustment (644 Body)