Home/Volkswagen/Jetta/Volkswagen Jetta V (2005-2011)/Repair manual/Reset Procedures/Maintenance Reminder Light Reset Procedures: Specifications
Contents Wiring diagrams Section: Reset Procedures All sections

Maintenance Reminder Light Reset Procedures: Specifications Volkswagen Jetta V

Wheel Sets With Different Pressure Specifications

Note. If unapproved wheel/tire combinations are installed, a 2nd wheel set must be learned. To perform this procedure, Volkswagen VAS 5051B is required.

  1. Read out tire pressure sensor IDs before installation.
  2. Switch TPMS to wheel set 2.
  3. Enter needed specified tire pressures and sensor IDs into system.