Home ReviewsRefund
Home/Volkswagen/Jetta/Volkswagen Jetta V (2005-2011)/Repair manual/Mechanical/2.0L - Engine Assembly - Engine Code(s): Cbfa & Ccta (Sedan…
Contents Wiring diagrams Section: Mechanical All sections

2.0L - Engine Assembly - Engine Code(s): Cbfa & Ccta (Sedan) (A5 Platform): Adjustments Volkswagen Jetta V

Mechanical ~142 words

ENGINE MOUNT ADJUSTMENT, CHECKING

  1. There must be at least 10 to 13 mm clearance -a- between the engine mount bracket -2- and the right longitudinal member.
  2. The casting edge on the engine mount bracket -2- must be parallel to the engine mount support arm -1- ; dimension -x- must be the same at the front and the rear.

Note. Dimension -a- can also be checked with corresponding round stock.

Only if there is noise (the engine or transmission hitting the longitudinal member when driving around curves) and dimension -a- is not within 10 to 13 mm

Adjust the engine/transmission mount; refer to one of the following

  1. Jetta/GLI for MY 08 through 10, Jetta SportWagen (US)/Jetta Wagon (Canada) for MY 09. Refer to «ENGINE AND TRANSMISSION MOUNT, ADJUSTING»(ref-479583-S21799287812012061300000) .

More articles — 2.0L - Engine Assembly - Engine Code(s): Cbfa & Ccta (Sedan) (A5 Platform)