| A/C Compressor | | 25 ± 2 |
| A/C Line Bracket to Frame Nut (1) | | 6 |
| A/C Line Retainer Screw (2) | | 3.5 |
| A/C Line to Dash Panel Bracket Nut (3) | | 20 |
| A/C Line to Dash Panel Bracket Retainer Screw (3) | | 3.5 |
| A/C Control Module J301 (Electric Manual) | | 1.5 |
| A/C Control Head (Climatronic) | | 9 ± 1.3 |
| Air Distribution Door Motor | | 1.5 |
| Air Distribution Housing Bolts | | 1.4 |
| Aluminum Support To Crossmember Bolt | | 9 ± 1.3 |
| Auxillary Heating Element Power Supply Nut | | 9 +/- 1. |
| Bracket to Heating and A/C Unit Bolt | | 9 ± 1.3 |
| Cable Bracket to Plenum Chamber Bolt | | 4.5 ± 0.7 |
| Condenser Mounting Bolts | | 5 ± 0.5 |
| Crossmember Support Bolt | | 20 ± 3 |
| Evacuating and Charging Valve | | 2 ± 0.2 |
| Expansion Valve Bolt | | 5 |
| Fluid Reservoir with Dryer Bolt | | 4.2 ± 0.7 |
| Fresh Air Blower | | 1 |
| Fresh Air/Recirculating Air/Back Pressure Door Adjuster | | 1.4 |
| Fresh Air Intake | | 2.5 +/- 0.4 |
| Heater Core Connection Flange Screw | | 2 |
| Heater Core Coolant Pipe Clamps | | 2 |
| Heating and A/C Unit Bolt (4) | | 8 ± 1 |
| Heat Shield in Front of the Expansion Valve Nut | | 6 ± 0.9 |
| High Pressure Sensor | | 8 ± 1 |
| Left Temperature Door Motor | | 1.4 |
| Radiator Mounting Bolt | | 7 |
| Refrigerant Lines to A/C Compressor | | 22 ± 1 |
| Refrigerant Lines to Condenser | | 12 ± 1.8 |
| Refrigerant Line to Expansion Valve Bolt | | 10 ± 1 |
| Ribbed Belt Pulley | | 35 ± 5 |
| Right Temperature Door Motor | | 1.4 |
| Temperature Regulator Door Motor | | 1.4 |
| (1) For bolt tightening clarification, refer to Refrigerant Circuit System Overview # 5 (2) For bolt tightening clarification, refer to Refrigerant Circuit System Overview # 8 (3) For bolt tightening clarification, refer to Refrigerant Circuit System Overview #'s 13 and 15 (4) For bolt tightening clarification, refer to Heater and A/C Unit1/2 # 6 |
