SEAT FORE AND AFT ADJUSTMENT CABLE
Removal
Remove seat. Refer to FRONT SEAT .
Remove clamp -1- and pull locking mechanism -2- out of bracket.
Scheme 55
Release tension on cable by pressing locking pin -arrow- and disengage at pin -1- in actuating lever -2-.
Scheme 56
Press out pin -1- and unclip mounting -3-.
Unclip cable guide -4- on seat frame.
Installation
To install, perform the steps used in removal in reverse order.
Press locking mechanism -1- into bracket until stop and adjust recess -arrow- to correct position.
Scheme 57
Press clip -2- on securely.