Home/Toyota/Sequoia/Toyota Sequoia I (2000-2004)/Repair manual/Automatic Trans/Automatic Transmission Diagnosis - A340E & A340F: Applicati…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Diagnosis - A340E & A340F: Application Toyota Sequoia I

APPLICATION

WARNINGVehicles are equipped with Supplemental Inflatable Restraint (SIR) system. When servicing vehicles, use care to avoid accidental air bag deployment. SIR system-related components are located in various locations throughout interior and exterior of vehicles, depending on application. Do not use electrical test equipment on or near these circuits. If necessary, deactivate SIR system before servicing components. See appropriate AIR BAG DEACTIVATION PROCEDURES article in GENERAL INFORMATION.
ApplicationTransmission Model
Sequoia
2WDA-340E
4WDA-340F
Tacoma
2WDA-340E
4WDA-340F
Tundra
2WDA-340E
4WDA-340F
4Runner
2WDA-340E
4WDA-340F

TRANSMISSION APPLICATION

CLUTCH & BAND APPLICATIONS

Gearshift Lever PositionElements In Use
"D" (Drive)
1st GearForward Clutch, No. 2 One-Way Clutch, OD One-Way Clutch & OD Direct Clutch
2nd GearForward Clutch, No. 1 One-Way Clutch, 2nd Brake, OD Direct Clutch & OD One-Way Clutch
3rd GearForward Clutch, 2nd Brake, Direct Clutch, OD Direct Clutch & OD One-Way Clutch
4th GearForward Clutch, 2nd Brake, OD Brake & Direct Clutch
"2" (Intermediate)
1st GearForward Clutch, No. 2 One-Way Clutch OD Direct Clutch & OD One-Way Clutch
2nd GearForward Clutch, 2nd Coast Brake, 2nd Brake, No. 1 One-Way Clutch, OD Direct Clutch & OD One-Way Clutch
3rd Gear (1)Forward Clutch, OD Direct Clutch, Direct Clutch, 2nd Brake & OD One-Way Clutch
"L" (Low)
1st GearForward Clutch, OD One-Way Clutch, No. 2 One-Way Clutch, OD Direct Clutch & 1st & Reverse Brake
2nd Gear (2)Forward Clutch, 2nd Coast Brake, 2nd Brake, No. 1 One-Way Clutch, OD Direct Clutch & OD One-Way Clutch
"R" (Reverse)OD Direct Clutch, Direct Clutch, OD One-Way Clutch & 1st & Reverse Brake
"N" (Neutral)OD Direct Clutch
"P" (Park)OD Direct Clutch
(1) Downshift only in "2" range and 3rd gear. No upshift. (2) Downshift only in "L" range and 2nd gear. No upshift.
(1)Downshift only in "2" range and 3rd gear. No upshift.
(2)Downshift only in "L" range and 2nd gear. No upshift.

CLUTCH & BAND APPLICATIONS