Home/Toyota/Highlander/Toyota Highlander I (2001-2003)/Repair manual/Automatic Trans/Automatic Transmission Diagnosis - U241E: Application
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Diagnosis - U241E: Application Toyota Highlander I

APPLICATION

WARNINGVehicles are equipped with Supplemental Inflatable Restraint (SIR) system. When servicing vehicles, use care to avoid accidental air bag deployment. SIR system-related components are located in various locations throughout interior and exterior of vehicles, depending on application. Do not use electrical test equipment on or near these circuits. If necessary, deactivate SIR system before servicing components. See appropriate AIR BAG RESTRAINT SYSTEMS article in RESTRAINTS.
ApplicationTransaxle Model
Highlander (2.4L)U241E
RAV4 (2.0L)U241E

TRANSAXLE APPLICATION

CLUTCH & BRAKE APPLICATIONS

Gearshift Lever PositionElements In Use
"D" (Drive)
1st GearForward Clutch, No. 2 One-Way Clutch & Underdrive Brake
2nd GearForward Clutch, No. 1 One-Way Clutch, 2nd Brake, Underdrive Brake & Underdrive One-Way Clutch
3rd GearDirect Clutch, Forward Clutch, 2nd Brake & Underdrive Brake
OverdriveDirect Clutch, Forward Clutch, 2nd Brake & Underdrive Clutch
"2" (2nd)
1st GearForward Clutch, No. 2 One-Way Clutch, Underdrive One-Way Clutch & Underdrive Brake
2nd GearForward Clutch, 2nd Brake, No. 1 One-Way Clutch, Underdrive Brake, Underdrive One-Way Clutch & 2nd Coast Brake
3rd Gear (1)Direct Clutch, Forward Clutch, 2nd Brake, Underdrive Brake & Underdrive One-Way Clutch
"L" (Low)
1st GearForward Clutch, Underdrive Brake, No. 2 One-Way Clutch & 1st & Reverse Brake
2nd Gear (2)Forward Clutch, 2nd Coast Brake, 2nd Brake, No. 1 One-Way Clutch, Underdrive One-Way Clutch & Underdrive Brake
"R" (Reverse)Direct Clutch, Underdrive Brake, & 1st & Reverse Brake
"N" (Neutral)Underdrive Brake
"P" (Park)Underdrive Brake
(1) Downshift only in 3rd gear for "2" position. (2) Downshift only in 2nd gear for "L" position. Upshift does not occur.
(1)Downshift only in 3rd gear for "2" position.
(2)Downshift only in 2nd gear for "L" position. Upshift does not occur.

CLUTCH & BRAKE APPLICATIONS