Home/Toyota/4Runner/Toyota 4Runner V (2009-2013)/Repair manual/Engine Control Systems/Engine Control (2TR-FE) (Service Specifications): Other
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine Control (2TR-FE) (Service Specifications): Other Toyota 4Runner V

SERVICE DATA

Spark plugElectrode gapMaximum1.3 mm (0.0512 in.)
Standard1.0 to 1.1 mm (0.0394 to 0.0433 in.)
Camshaft timing oil control valveStandard resistance1 - 220°C (68°F)6.9 to 7.9 ohms
Throttle body with motor assemblyStandard resistance1 (M-) - 2 (M+)20°C (68°F)0.3 to 100 ohms
Accelerator pedal position sensorStandard voltageAccel sensor out No. 1Released0.5 to 1.1 V
Depressed2.6 to 4.5 V
Accel sensor out No. 2Released1.2 to 2.0 V
Depressed3.4 to 5.3 V
Mass air flow meterStandard resistance4 (THA) - 5 (E2)20°C (-4°F)12.5 to 16.9 kohms
20°C (68°F)2.19 to 2.67 kohms
60°C (140°F)0.50 to 0.68 kohms
Camshaft position sensorStandard resistance1 (G+) - 2 (G-)Cold835 to 1400 ohms
Hot1060 to 1645 ohms
Crankshaft position sensorStandard resistance1 (NE+) - 2 (NE-)Cold1630 to 2740 ohms
Hot2065 to 3225 ohms
Engine coolant temperature sensorStandard resistance1 (E2) - 2 (THW)20°C (68°F)2.32 to 2.59 kohms
80°C (176°F)0.310 to 0.326 kohms
Knock sensorStandard resistance1 (Ground) - 2 (Output)20°C (68°F)120 to 280 kohms
Manifold absolute pressure sensorStandard voltage3 (VC) - 1 (E2)Ignition switch ON4.5 to 5.5 V
Air fuel ratio sensorStandard resistance1 (HA1A) - 2 (+B)20°C (68°F)1.8 to 3.4 ohms
Heated oxygen sensorStandard resistance1 (HT1B) - 2 (+B)20°C (68°F)11 to 16 ohms