CAPACITIES
| CAUTION | Some transaxles may require that differential be filled separately from transaxle. A separate quantity of lubricant is required for differential. See appropriate FLUID CAPACITIES table. |
| WARNING | On Prius, read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
FLUID CAPACITIES (AVALON)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Dexron-III ATF) | 5.0 Qts. (4.7L) |
| Cooling System (Includes Heater) (2) | 9.5 Qts. (9.0L) |
| Crankcase (Includes Filter) (3) | 5.0 Qts. (4.7L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.80L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
FLUID CAPACITIES (AVALON)
FLUID CAPACITIES (CAMRY)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) | 3.7 Qts. (3.5L) |
| Cooling System (Includes Heater) (2) |
| 2.4L | 6.6 Qts. (6.2L) |
| 3.0L | 9.8 Qts. (9.2L) |
| Crankcase (Includes Filter) (3) |
| 2.4L | 4.0 Qts. (3.8L) |
| 3.0L | 5.0 Qts. (4.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5 Gear Oil) | 2.6 Qts. (2.5L) |
| Power Steering Fluid (Dexron-III ATF) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
FLUID CAPACITIES (CAMRY SOLARA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle |
| 2.4L (Toyota Genuine ATF Type T-IV) | 4.1 Qts. (3.9L) |
| 3.0L (Dexron-III ATF) | 5.0 Qts. (4.7L) |
| Cooling System (Includes Heater) (2) |
| 2.4L | 6.5 Qts. (6.2L) |
| 3.0L | 9.7 Qts. (9.2L) |
| Crankcase (Includes Filter) (3) |
| 2.4L | 4.0 Qts. (3.8L) |
| 3.0L | 5.0 Qts. (4.7L) |
| Manual Transaxle (SAE 75W-90/API GL-4 or GL-5 Gear Oil) | 2.6 Qts. (2.5L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.8L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
FLUID CAPACITIES (CAMRY SOLARA)
FLUID CAPACITIES (CELICA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) |
| 1.8L (1ZZ-FE) | 3.1 Qts. (2.9L) |
| 1.8L (2ZZ-GE) | 3.7 Qts. (3.5L) |
| Cooling System (Includes Heater) (2) |
| 1.8L (1ZZ-FE) |
| A/T | 5.9 Qts. (5.6L) |
| M/T | 6.0 Qts. (5.7L) |
| 1.8L (2ZZ-GE) |
| A/T | 6.1 Qts. (5.8L) |
| M/T | 6.2 Qts. (5.9L) |
| Crankcase (Includes Filter) (3) |
| 1.8L (1ZZ-FE) | 3.9 Qts. (3.7L) |
| 1.8L (2ZZ-GE) | 4.8 Qts. (4.5L) |
| Manual Transaxle (SAE 75W-90/API GL-4 or GL-5 Gear Oil) |
| 1.8L (1ZZ-FE) | 2.0 Qts. (1.9L) |
| 1.8L (2ZZ-GE) | 2.4 Qts. (2.3L) |
| Power Steering Fluid (Dexron-III ATF) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
FLUID CAPACITIES (CELICA)
FLUID CAPACITIES (COROLLA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) | 3.3 Qts. (3.1L) |
| Cooling System (Includes Heater) (2) | 6.9 Qts. (6.5L) |
| Crankcase (Includes Filter) (3) | 3.9 Qts. (3.7L) |
| Differential (4) |
| 3-Speed A/T (Dexron-III ATF) | 1.5 Qts. (1.4L) |
| Manual Transaxle (SAE 75W-90/API GL-4 or GL-5 Gear Oil) | 2.0 Qts. (1.9L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.80L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity. |
FLUID CAPACITIES (COROLLA)
FLUID CAPACITIES (ECHO)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) | 3.1 Qts. (2.9L) |
| Cooling System (Includes Heater) (2) |
| A/T | 4.5 Qts. (4.3L) |
| M/T | 4.7 Qts. (4.4L) |
| Crankcase (Includes Filter) (3) | 3.9 Qts. (3.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5 Gear Oil) | 2.0 Qts. (1.9L) |
| Power Steering Fluid (Dexron-III ATF) | 0.74 Qt. (0.7L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
FLUID CAPACITIES (HIGHLANDER)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) | 3.7 Qts. (3.5L) |
| Cooling System (Includes Heater) (2) |
| 2.4L | 6.8 Qts. (6.4L) |
| 3.0L | 9.9 Qts. (9.4L) |
| Crankcase (Includes Filter) (3) |
| 2.4L | 4.0 Qts. (3.8L) |
| 3.0L | 5.0 Qts. (4.7L) |
| Power Steering Fluid (Dexron-III ATF) |
| 2.4L |
| With Towing Package | 1.0 Qt. (0.9L) |
| Without Towing Package | 0.85 Qt. (0.8L) |
| 3.0L | 0.85 Qt. (0.8L) |
| Rear Differential (4WD) (SAE 80W-90/API GL-5 Gear Oil) (4) | 1.0 Qt. (0.9L) |
| Transfer Case (4WD) (SAE 80W-90/API GL-5 Gear Oil) | 1.0 Qt. (0.9L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
FLUID CAPACITIES (HIGHLANDER)
FLUID CAPACITIES (LAND CRUISER)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Toyota Genuine ATF Type T-IV) | 3.2 Qts. (3.0L) |
| Cooling System (Includes Heater) (2) |
| With Front Heater Only | 15.5 Qts. (14.7L) |
| With Front & Rear Heater | 16.3 Qts. (15.4L) |
| Crankcase (Includes Filter) (3) | 7.2 Qts. (6.8L) |
| Differential |
| Front Axle (API GL-5 Gear Oil) (4) | 1.7 Qts. (1.6L) |
| Rear Axle |
| With Limited Slip Differential (LSD) (Hypoid Gear Oil For LSD API GL-5) (4) | 3.5 Qts. (3.3L) |
| Standard Differential (API GL-5 Gear Oil) (4) | 3.5 Qts. (3.3L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.80L) |
| Transfer Case (SAE 75W-90/API GL-4 Or GL-5 Gear Oil) | 1.4 Qts. (1.3L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
FLUID CAPACITIES (LAND CRUISER)
FLUID CAPACITIES (MATRIX)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) |
| 1.8L (1ZZ-FE 2WD) | 3.3 Qts. (3.1L) |
| 1.8L (1ZZ-FE AWD) | 3.1 Qts. (2.9L) |
| 1.8L (2ZZ-GE) | 4.3 Qts. (4.1L) |
| Cooling System (Includes Heater) (2) |
| 1.8L (1ZZ-FE) | 6.9 Qts. (6.5L) |
| 1.8L (2ZZ-GE) | 7.0 Qts. (6.7L) |
| Crankcase (Includes Filter) (3) |
| 1.8L (1ZZ-FE) | 3.9 Qts. (3.7L) |
| 1.8L (2ZZ-GE) | 4.8 Qts. (4.4L) |
| Manual Transaxle (SAE 75W-90/API GL-4 or GL-5 Gear Oil) |
| 5-Speed | 2.0 Qts. (1.9L) |
| 6-Speed | 2.4 Qts. (2.3L) |
| Power Steering Fluid (Dexron-III ATF) | 1.1 Qts. (1.0L) |
| Rear Differential (AWD) (SAE 80W-90/API GL-5 Gear Oil) (4) | 0.5 Qts. (0.5L) |
| Transfer Case (AWD) (SAE 80W-90/API GL-5 Gear Oil) | 0.8 Qts. (0.8L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
FLUID CAPACITIES (MATRIX)
FLUID CAPACITIES (MR2)
| Application | (1) Quantity |
|---|
| Cooling System (Includes Heater) (2) | 11.0 Qts. (10.4L) |
| Crankcase (Includes Filter) (3) | 3.9 Qts. (3.7L) |
| Manual Transaxle (SAE 75W-90/API GL-4 Or GL-5 Gear Oil) |
| With Limited Slip Differential | 1.9 Qts. (1.8L) |
| Without Limited Slip Differential | 2.0 Qts. (1.9L) |
| Sequential Manual Transaxle (4) (5) |
| With Limited Slip Differential | 2.2 Qts. (2.1L) |
| Without Limited Slip Differential | 2.4 Qts. (2.3L) |
| Power Steering Fluid (Toyota Power Steering Fluid EH) | 0.63 Qt. (0.6L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. Standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. Sequential manual transaxle is an electronic controlled manual transaxle in which clutch is operated and transaxle is shifted hydraulically by moving shift lever forward or backward. Sequential manual transaxle may be identified by shift lever pattern and uses a special fluid in the fluid reservoir. Shift lever pattern consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. (5) Use only Sequential M/T Fluid (08886-02206). |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. Standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. Sequential manual transaxle is an electronic controlled manual transaxle in which clutch is operated and transaxle is shifted hydraulically by moving shift lever forward or backward. Sequential manual transaxle may be identified by shift lever pattern and uses a special fluid in the fluid reservoir. Shift lever pattern consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. |
| (5) | Use only Sequential M/T Fluid (08886-02206). |
FLUID CAPACITIES (PRIUS)
| Application | (2) Quantity |
|---|
| Crankcase (Includes Filter) (3) | 3.9 Qts. (3.7L) |
| Cooling System |
| Engine Cooling System (Includes Heater) (4) | 5.2 Qts. (4.9L) |
| Inverter Cooling System (4) (5) | 2.7 Qts. (2.6L) |
| Power Steering Fluid | (6) |
| Transaxle Unit (Toyota Genuine ATF Type T-IV) | 4.9 Qts. (4.6L) |
| (1) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . (2) Approximate quantity is listed. (3) Use an API SL energy conserving engine oil. (4) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (5) This is coolant used for cooling the inverter system. Coolant reservoir is located on top of engine, near inverter. (6) This vehicle does not use power steering fluid as an electric steering gear assembly is used. |
| (1) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (2) | Approximate quantity is listed. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (5) | This is coolant used for cooling the inverter system. Coolant reservoir is located on top of engine, near inverter. |
| (6) | This vehicle does not use power steering fluid as an electric steering gear assembly is used. |
FLUID CAPACITIES (PRIUS) (1)
FLUID CAPACITIES (RAV4)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Toyota Genuine ATF Type T-IV) | 3.5 Qts. (3.3L) |
| Cooling System (Includes Heater) (2) |
| A/T | 6.6 Qts. (6.2L) |
| M/T | 6.7 Qts. (6.3L) |
| Crankcase (Includes Filter) (3) | 4.4 Qts. (4.2L) |
| Manual Transaxle (SAE 75W-90/API GL-4 Or GL-5 Gear Oil) |
| 2WD | 2.6 Qts. (2.5L) |
| 4WD | 3.6 Qts. (3.4L) |
| Power Steering Fluid (Dexron-II Or III ATF) | 0.75 Qt. (0.71L) |
| Rear Differential (4WD) (API GL-5 Gear Oil) (4) | 1.0 Qt. (0.9L) |
| Transfer Case (SAE 80W-90/API GL-5 Gear Oil) | 0.95 Qt. (0.90L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
FLUID CAPACITIES (SEQUOIA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Toyota Genuine ATF Type T-IV) | 2.1 Qts. (2.0L) |
| Cooling System (Includes Heater) (2) |
| With Front Heater Only | 12.4 Qts. (11.7L) |
| With Front & Rear Heater | 14.1 Qts. (13.4L) |
| Crankcase (Includes Filter) (3) | 6.5 Qts. (6.2L) |
| Differential |
| Front Axle (SAE 75W-90/API GL-5 Gear Oil) | 1.2 Qts. (1.1L) |
| Rear Axle (API GL-5 Gear Oil) (4) | 3.9 Qts. (3.7L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.8L) |
| Transfer Case (SAE 75W-90/API GL-4 Or GL-5 Gear Oil) | 1.3 Qts. (1.2L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use Synthetic oil SAE 75W-140. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use Synthetic oil SAE 75W-140. |
FLUID CAPACITIES (SEQUOIA)
FLUID CAPACITIES (SIENNA)
| Application | (1) Quantity |
|---|
| Automatic Transaxle (Dexron-III ATF) | 5.0 Qts. (4.7L) |
| Cooling System (Includes Heater) (2) | 11.0 Qts. (10.4L) |
| Crankcase (Includes Filter) (3) | 5.0 Qts. (4.7L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.8L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
FLUID CAPACITIES (SIENNA)
FLUID CAPACITIES (TACOMA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Dexron-II Or III ATF (2.4L)) (Toyota Genuine ATF Type T-IV (2.7L & 3.4L)) |
| 2WD (Except PreRunner) | 2.5 Qts. (2.4L) |
| 4WD & PreRunner | 2.1 Qts. (2.0L) |
| Cooling System (Includes Heater) (2) |
| 2WD (Except PreRunner) |
| A/T |
| 2.4L | 8.2 Qts. (7.8L) |
| M/T |
| 2.4L | 8.5 Qts. (8.0L) |
| 3.4L | 10.3 Qts. (9.7L) |
| 4WD & PreRunner |
| A/T |
| 2.7L | 8.7 Qts. (8.2L) |
| 3.4L | 10.5 Qts. (10.0L) |
| M/T |
| 2.7L | 8.8 Qts. (8.3L) |
| 3.4L | 10.7 Qts. (10.1L) |
| Crankcase (Includes Filter) (3) |
| 2WD (Except PreRunner) |
| 2.4L | 5.8 Qts. (5.5L) |
| 3.4L | 5.7 Qts. (5.4L) |
| 4WD & PreRunner |
| 2.7L | 5.7 Qts. (5.4L) |
| 3.4L | 5.0 Qts. (4.7L) |
| Differential |
| 2WD (Except PreRunner) (API GL-5 Gear Oil) (4) |
| 2.4L | 1.4 Qts. (1.4L) |
| 3.4L | 2.7 Qts. (2.6L) |
| 4WD & PreRunner |
| Front Axle (Except PreRunner) (SAE 75W-90/API GL-5 Gear Oil) | 1.2 Qts. (1.2L) |
| Rear Axle (API GL-5 Gear Oil) (4) |
| Short Wheel Base |
| With Rear Differential Lock System | 2.8 Qts. (2.7L) |
| Without Rear Differential Lock System | 2.7 Qts. (2.6L) |
| Extra Long Wheel Base |
| With Rear Differential Lock System | 3.1 Qts. (3.0L) |
| Without Rear Differential Lock System | 2.6 Qts. (2.5L) |
| Manual Transmission (SAE 75W-90/API GL-4 Or GL-5 Gear Oil) |
| 2.4L | 2.7 Qts. (2.6L) |
| 2.7L | 2.6 Qts. (2.5L) |
| 3.4L (2WD) | 2.7 Qts. (2.6L) |
| 3.4L (4WD) | 2.3 Qts. (2.2L) |
| Power Steering Fluid (Dexron II Or III ATF) | 0.85 Qt. (0.8L) |
| Transfer Case (SAE 75W-90/API GL-4 Or GL-5 Gear Oil) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
FLUID CAPACITIES (TACOMA)
FLUID CAPACITIES (TUNDRA)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Toyota Genuine ATF Type T-IV) | 2.1 Qts. (2.0L) |
| Crankcase (Includes Filter) (2) |
| 3.4L | 5.5 Qts. (5.2L) |
| 4.7L | 6.5 Qts. (6.2L) |
| Cooling System (Includes Heater) (3) |
| A/T |
| 3.4L | 10.5 Qts. (10.0L) |
| 4.7L | 12.3 Qts. (11.6L) |
| M/T | 10.6 Qts. (10.0L) |
| Differential |
| 2WD |
| With Limited Slip Differential (Hypoid Gear Oil For LSD API GL-5) (4) | 3.3 Qts. (3.1L) |
| Without Limited Slip Differential (5) | 4.0 Qts. (3.8L) |
| 4WD |
| Front Axle (SAE 75W-90/API GL-5 Gear Oil) | 1.2 Qts. (1.1L) |
| Rear Axle |
| With Limited Slip Differential (Hypoid Gear Oil For LSD API GL-5) (4) | 3.1 Qts. (2.9L) |
| Without Limited Slip Differential (5) | 3.7 Qts. (3.5L) |
| Manual Transmission (SAE 75W-90/API GL-5 Gear Oil) |
| 2WD | 2.7 Qts. (2.6L) |
| 4WD | 2.3 Qts. (2.2L) |
| Power Steering Fluid (Dexron-III ATF) | 1.1 Qts. (1.0L) |
| Transfer Case (SAE 75W-90/API GL-5 Gear Oil) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SL energy conserving engine oil. (3) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. (5) Use Synthetic oil SAE 75W-140. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SL energy conserving engine oil. |
| (3) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (5) | Use Synthetic oil SAE 75W-140. |
FLUID CAPACITIES (TUNDRA)
FLUID CAPACITIES (4RUNNER)
| Application | (1) Quantity |
|---|
| Automatic Transmission (Toyota Genuine ATF Type T-IV) |
| 4.0L | 2.1 Qts. (2.0L) |
| 4.7L | 3.2 Qts. (3.0L) |
| Cooling System (Includes Heater) (2) |
| 4.0L | 10.4 Qts. (9.8L) |
| 4.7L | 13.0 Qts. (12.3L) |
| Crankcase (Includes Filter) (3) |
| 4.0L | 5.5 Qts. (5.2L) |
| 4.7L | 6.5 Qts. (6.2L) |
| Differential |
| 4.0L 2WD (API GL-5 Gear Oil) (4) | 3.2 Qts. (3.1L) |
| 4.0L 4WD (Front Axle) (API GL-5 Gear Oil) | 1.6 Qts. (1.5L) |
| 4.0L 4WD (Rear Axle) (4) | 3.2 Qts. (3.1L) |
| 4.7L 2WD (API GL-5 Gear Oil) (4) | 3.2 Qts. (3.1L) |
| 4.7L 4WD (Front Axle) (API GL-5 Gear Oil) | 1.5 Qts. (1.4L) |
| 4.7L 4WD (Rear Axle) (4) | 3.2 Qts. (3.1L) |
| Power Steering Fluid (Dexron-III ATF) | 0.85 Qt. (0.80L) |
| Transfer Case (SAE 75W-90/API GL-5 Gear Oil) | 1.5 Qts. (1.4L) |
| (1) Approximate quantity is listed. (2) Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. (3) Use an API SL energy conserving engine oil. (4) Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
| (1) | Approximate quantity is listed. |
| (2) | Use Toyota Long Life coolant or equivalent ethylene-glycol type coolant. |
| (3) | Use an API SL energy conserving engine oil. |
| (4) | Use SAE 80W or 80W-90 gear oil in temperatures less than 0°F (-18°C), or SAE 90 gear oil in temperatures of 0°F (-18°C) or more. |
FLUID CAPACITIES (4RUNNER)
ENGINE COMPRESSION SPECIFICATIONS (4-CYLINDER)
| Application | Specification |
|---|
| Normal Compression Pressure |
| Camry & Camry Solara | 198 psi (13.9 kg/cm 2 ) |
| Celica |
| 1.8L (1ZZ-FE) | 189 psi (10.2 kg/cm 2 ) |
| 1.8L (2ZZ-GE) | 203 psi (14.3 kg/cm 2 ) |
| Corolla | 189 psi (10.2 kg/cm 2 ) |
| ECHO | 213 psi (15.0 kg/cm 2 ) |
| Highlander | 198 psi (13.9 kg/cm 2 ) |
| Matrix |
| 1.8L (1ZZ-FE) | 189 psi (10.2 kg/cm 2 ) |
| 1.8L (2ZZ-GE) | 203 psi (14.3 kg/cm 2 ) |
| MR2 | 184 psi (13.0 kg/cm 2 ) |
| Prius (1) | 106 psi (7.4 kg/cm 2 ) |
| RAV4 | 184 psi (13.0 kg/cm 2 ) |
| Tacoma | 178 psi (12.5 kg/cm 2 ) |
| Minimum Compression Pressure |
| Camry & Camry Solara | 142 psi (10.0 kg/cm 2 ) |
| Celica | 145 psi (10.2 kg/cm 2 ) |
| Corolla | 145 psi (10.2 kg/cm 2 ) |
| ECHO | 156 psi (11.0 kg/cm 2 ) |
| Highlander | 142 psi (10.0 kg/cm 2 ) |
| Matrix | 145 psi (10.2 kg/cm 2 ) |
| MR2 | 145 psi (10.2 kg/cm 2 ) |
| Prius | 77 psi (5.4 kg/cm 2 ) |
| RAV4 | 145 psi (10.2 kg/cm 2 ) |
| Tacoma | 128 psi (9.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| Camry & Camry Solara | 14 psi (1.0 kg/cm 2 ) |
| Celica & Matrix |
| 1.8L (1ZZ-FE) | 14 psi (1.0 kg/cm 2 ) |
| 1.8L (2ZZ-GE) | 16 psi (1.1 kg/cm 2 ) |
| Corolla, ECHO, Highlander, MR2, Prius, RAV4 & Tacoma | 14 psi (1.0 kg/cm 2 ) |
| (1) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (1) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
ENGINE COMPRESSION SPECIFICATIONS (4-CYLINDER)
ENGINE COMPRESSION SPECIFICATIONS (V6)
| Application | Specification |
|---|
| Normal Compression Pressure |
| Avalon, Camry Solara & Sienna | 218 psi (15.3 kg/cm 2 ) |
| Camry & Highlander | 213 psi (15.0 kg/cm 2 ) |
| Tacoma & Tundra | 174 psi (12.2 kg/cm 2 ) |
| 4Runner | 189 psi (10.2 kg/cm 2 ) |
| Minimum Compression Pressure |
| Avalon, Camry Solara, Sienna, Tacoma, Tundra & 4Runner | 145 psi (10.2 kg/cm 2 ) |
| Camry & Highlander | 142 psi (10.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| All Models | 14 psi (1.0 kg/cm 2 ) |
ENGINE COMPRESSION SPECIFICATIONS (V6)
ENGINE COMPRESSION SPECIFICATIONS (V8)
| Application | Specification |
|---|
| Normal Compression Pressure |
| Land Cruiser, Sequoia & Tundra | 192 psi (13.5 kg/cm 2 ) |
| 4Runner | 178 psi (12.5 kg/cm 2 ) |
| Minimum Compression Pressure |
| Land Cruiser, Sequoia, Tundra & 4Runner | 142 psi (10.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| Land Cruiser, Sequoia, Tundra & 4Runner | 14 psi (1.0 kg/cm 2 ) |
ENGINE COMPRESSION SPECIFICATIONS (V8)
VALVE CLEARANCE SPECIFICATIONS (4-CYL)
| Application | In. (mm) |
|---|
| Camry & Camry Solara |
| Intake | 0.007-0.011 (0.19-0.29) |
| Exhaust | 0.012-0.016 (0.30-0.40) |
| Celica & Matrix |
| 1.8L (1ZZ-FE) |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.010-0.014 (0.25-0.35) |
| 1.8L (2ZZ-GE) |
| Intake | 0.003-0.007 (0.08-0.18) |
| Exhaust | 0.009-0.013 (0.22-0.32) |
| Corolla & ECHO |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.010-0.014 (0.25-0.35) |
| Highlander |
| Intake | 0.007-0.011 (0.19-0.29) |
| Exhaust | 0.012-0.016 (0.30-0.40) |
| MR2 |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.010-0.014 (0.25-0.35) |
| Prius (2) |
| Intake | 0.007-0.009 (0.17-0.23) |
| Exhaust | 0.011-0.013 (0.27-0.33) |
| RAV4 |
| Intake | 0.007-0.012 (0.19-0.29) |
| Exhaust | 0.012-0.016 (0.30-0.40) |
| Tacoma |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.010-0.014 (0.25-0.35) |
| (1) Adjust valve clearance with engine cold. Verify valve clearance listed with valve clearance listed on underhood label (if available). If valve clearance on underhood label differs from valve clearance listed, use specification on underhood label. (2) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (1) | Adjust valve clearance with engine cold. Verify valve clearance listed with valve clearance listed on underhood label (if available). If valve clearance on underhood label differs from valve clearance listed, use specification on underhood label. |
| (2) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
VALVE CLEARANCE SPECIFICATIONS (4-CYL) (1)
VALVE CLEARANCE SPECIFICATIONS (V6)
| Application | In. (mm) |
|---|
| Avalon, Camry, Camry Solara, Highlander & Sienna |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.010-0.014 (0.25-0.35) |
| Tacoma & Tundra |
| Intake | 0.006-0.009 (0.15-0.23) |
| Exhaust | 0.011-0.014 (0.29-0.35) |
| 4Runner |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.011-0.015 (0.29-0.39) |
| (1) Adjust valve clearance with engine cold. Verify valve clearance listed with valve clearance listed on underhood label (if available). If valve clearance on underhood label differs from valve clearance listed, use specification on underhood label. |
| (1) | Adjust valve clearance with engine cold. Verify valve clearance listed with valve clearance listed on underhood label (if available). If valve clearance on underhood label differs from valve clearance listed, use specification on underhood label. |
VALVE CLEARANCE SPECIFICATIONS (V6) (1)
VALVE CLEARANCE SPECIFICATIONS (V8)
| Application | In. (mm) |
|---|
| Land Cruiser, Sequoia, Tundra & 4Runner |
| Intake | 0.006-0.010 (0.15-0.25) |
| Exhaust | 0.010-0.014 (0.25-0.35) |
| (1) Adjust valve clearance with engine cold. Verify valve clearance listed with valve clearance listed on underhood label (if available). If valve clearance on underhood label differs from valve clearance listed, use specification on underhood label. |
| (1) | Adjust valve clearance with engine cold. Verify valve clearance listed with valve clearance listed on underhood label (if available). If valve clearance on underhood label differs from valve clearance listed, use specification on underhood label. |
VALVE CLEARANCE SPECIFICATIONS (V8) (1)
SPARK PLUG SPECIFICATIONS (4-CYLINDER)
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| Camry & Camry Solara | 0.043 (1.10) (1) | 14 (19) |
| Celica, Corolla & Matrix | 0.043 (1.10) (1) | 13 (18) |
| ECHO | 0.031 (0.80) | 13 (18) |
| Highlander | 0.043 (1.10) (1) | 14 (19) |
| MR2 | 0.043 (1.10) (1) | 19 (26) |
| Prius (2) | 0.043 (1.10) (1) | 13 (18) |
| RAV4 | 0.043 (1.10) (1) | 14 (19) |
| Tacoma | 0.043 (1.10) | 15 (20) |
| (1) Engine is equipped with irridium-tipped spark plugs. DO NOT attempt to adjust spark plug gap. (2) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (1) | Engine is equipped with irridium-tipped spark plugs. DO NOT attempt to adjust spark plug gap. |
| (2) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
SPARK PLUG SPECIFICATIONS (4-CYLINDER)
SPARK PLUG SPECIFICATIONS (V6)
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| Avalon & Camry | 0.043 (1.10) (1) | 13 (18) |
| Camry Solara | 0.043 (1.10) (2) | 13 (18) |
| Highlander & Sienna | 0.043 (1.10) (1) | 13 (18) |
| Tacoma, Tundra & 4Runner | 0.043 (1.10) (2) | 13 (18) |
| (1) Engine is equipped with irridium-tipped spark plugs. DO NOT attempt to adjust spark plug gap. (2) Engine is equipped with twin ground electrode patinum-tipped spark plugs. DO NOT attempt to adjust spark plug gap. |
| (1) | Engine is equipped with irridium-tipped spark plugs. DO NOT attempt to adjust spark plug gap. |
| (2) | Engine is equipped with twin ground electrode patinum-tipped spark plugs. DO NOT attempt to adjust spark plug gap. |
SPARK PLUG SPECIFICATIONS (V6)
SPARK PLUG SPECIFICATIONS (V8)
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| Land Cruiser & 4Runner | 0.043 (1.10) (1) | 13 (18) |
| Sequoia & Tundra | 0.031 (0.80) | 13 (18) |
| (1) Engine is equipped with irridium-tipped spark plugs. DO NOT attempt to adjust spark plug gap. |
| (1) | Engine is equipped with irridium-tipped spark plugs. DO NOT attempt to adjust spark plug gap. |
SPARK PLUG SPECIFICATIONS (V8)
IDLE SPEED SPECIFICATIONS (4-CYLINDER)
| Application | RPM |
|---|
| Camry |
| A/T | 610-710 |
| M/T | 650-750 |
| Camry Solara |
| A/T | 600-700 |
| M/T | 650-750 |
| Celica & Matrix |
| 1.8L (1ZZ-FE) |
| A/T | 700-800 |
| M/T | 650-750 |
| 1.8L (2ZZ-GE) |
| A/T | 700-800 |
| M/T | 750-850 |
| Corolla | 650-750 |
| ECHO |
| A/T | 650-750 |
| M/T | 600-700 |
| Highlander | 600-700 |
| MR2 | 650-750 |
| Prius (2) | 950-1050 |
| RAV4 & Tacoma | 650-750 |
| (1) Check with engine at normal operating temperature, transaxle/transmission in Neutral (except Prius, in Park on Prius), parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, electric cooling fan off (if equipped), and A/C and all accessories off. (2) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . Check with transit in inspection mode and transaxle in Park. |
| (1) | Check with engine at normal operating temperature, transaxle/transmission in Neutral (except Prius, in Park on Prius), parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, electric cooling fan off (if equipped), and A/C and all accessories off. |
| (2) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . Check with transit in inspection mode and transaxle in Park. |
IDLE SPEED SPECIFICATIONS (4-CYLINDER) (1)
IDLE SPEED SPECIFICATIONS (V6)
| Application | RPM |
|---|
| Avalon | 600-700 |
| Camry | 550-650 |
| Camry Solara, Highlander, Sienna, Tacoma, Tundra & 4Runner | 650-750 |
| (1) Check with engine at normal operating temperature, transaxle/transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transaxle/transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
IDLE SPEED SPECIFICATIONS (V6) (1)
IDLE SPEED SPECIFICATIONS (V8)
| Application | RPM |
|---|
| Land Cruiser, Sequoia, Tundra & 4Runner | 650-750 |
| (1) Check with engine at normal operating temperature, transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transmission in Neutral, parking brake applied, air cleaner and all air intake hoses installed, all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
IDLE SPEED SPECIFICATIONS (V8) (1)
DASHPOT SPECIFICATIONS
| Application | RPM |
|---|
| Tacoma 3.4L M/T | 1800-2200 |
| (1) Check with engine at normal operating temperature. |
| (1) | Check with engine at normal operating temperature. |
DASHPOT SPECIFICATIONS (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (AVALON)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking throttle position sensor TP sensor. |
| (1) | Apply vacuum to throttle opener before checking throttle position sensor TP sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (AVALON) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CAMRY)
| Terminals | Ohms |
|---|
| VC & E2 | (1) 1200-3200 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CAMRY)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CAMRY SOLARA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 2.4L | Fully Closed | VC & E2 | (1) 1200-3200 |
| 3.0L | Fully Closed | VTA & E2 | 200-6300 |
| 3.0L (2) | Fully Open | VTA & E2 | 2000-10,200 |
| 3.0L | Fully Closed | VC & E2 | 2500-5900 |
| (1) Resistance at 68°F (20°C). (2) Apply vacuum to throttle opener before checking throttle position sensor. |
| (1) | Resistance at 68°F (20°C). |
| (2) | Apply vacuum to throttle opener before checking throttle position sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CAMRY SOLARA)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CELICA & ECHO)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (CELICA & ECHO)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (COROLLA & MATRIX)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-6000 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (COROLLA & MATRIX)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (HIGHLANDER)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (HIGHLANDER)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (LAND CRUISER)
| Terminals | Ohms |
|---|
| VC & E2 | (1) 1250-2350 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (LAND CRUISER)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)
| Throttle Position | Terminals | Ohms |
|---|
| Except Sequential Manual Transaxle (1) |
| Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
| Sequential Manual Transaxle (1) |
| Fully Closed | VC & E2 | (2) 1200-3200 |
| (1) There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. Standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. Sequential manual transaxle is an electronic controlled manual transaxle in which clutch is operated and transaxle is shifted hydraulically by moving shift lever forward or backward. Sequential manual transaxle may be identified by shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. (2) Resistance at 68°F (20°C). |
| (1) | There are 2 types of manual transaxles used. A standard type manual transaxle and a sequential manual transaxle. Standard type manual transaxle is a common transaxle in which the driver operates the clutch and shifts the transaxle. Sequential manual transaxle is an electronic controlled manual transaxle in which clutch is operated and transaxle is shifted hydraulically by moving shift lever forward or backward. Sequential manual transaxle may be identified by shift lever pattern which consists of "R", "N", "S" and "+" in place of the conventional type shift lever pattern and no clutch pedal is used. |
| (2) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (MR2)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (PRIUS)
| Terminals | Ohms |
|---|
| VC & E2 | (2) 1200-3200 |
| (1) Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . (2) Resistance at 68°F (20°C). |
| (1) | Read service precautions before proceeding with service procedure. See SERVICE PRECAUTIONS . |
| (2) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (PRIUS) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (RAV4)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (RAV4)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SEQUOIA)
| Terminals | Ohms |
|---|
| VC & E2 | (1) 1250-2350 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SEQUOIA)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SIENNA)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking throttle position sensor. |
| (1) | Apply vacuum to throttle opener before checking throttle position sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (SIENNA) (1)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TACOMA WITHOUT ETCS)
| Throttle Position | Terminals | Ohms |
|---|
| Fully Closed | VTA & E2 | 200-5700 |
| Fully Open (1) | VTA & E2 | 2000-10,200 |
| Fully Closed | VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking throttle position sensor. |
| (1) | Apply vacuum to throttle opener before checking throttle position sensor. |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TACOMA WITHOUT ETCS)
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TUNDRA)
| Application | Throttle Position | Terminals | Ohms |
|---|
| 3.4L | Fully Closed | VTA & E2 | 200-5700 |
| 3.4L (1) | Fully Open | VTA & E2 | 2000-10,200 |
| 3.4L | Fully Closed | VC & E2 | 2500-5900 |
| 4.7L | Fully Closed | VC & E2 | (2) 1250-2350 |
| (1) Apply vacuum to throttle opener before checking throttle position sensor. (2) Resistance at 68°F (20°C). |
| (1) | Apply vacuum to throttle opener before checking throttle position sensor. |
| (2) | Resistance at 68°F (20°C). |
THROTTLE POSITION SENSOR RESISTANCE SPECIFICATIONS (TUNDRA)
