Home ReviewsRefund
Home/Toyota/4Runner/Toyota 4Runner III (1995-2003)/Repair manual/Automatic HVAC System/A/c-Heater System - Automatic: Overhaul
Contents Wiring diagrams Section: Automatic HVAC System All sections

A/c-Heater System - Automatic: Overhaul Toyota 4Runner III

Automatic HVAC System

Disassembly

  1. Remove compressor clutch relay, blower motor linear controller and low blower resistor. (Схема №13) Release spring clips holding case halves together. Remove any screws at case joints. Separate upper and lower cases from evaporator core.
  2. Remove thermistor together with holder. Remove heat insulator from outlet tube. Remove high-side (inlet) line from expansion valve and remove expansion valve.

More articles — A/c-Heater System - Automatic