Home/Suzuki/Sidekick/Suzuki Sidekick I (1988-1998)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Specifications Suzuki Sidekick I

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Engine Coolant Temperature (ECT) Sensor
Except Swift26-40 (35-54)
Swift DOHC(1) *
Swift SOHC15-22 (20-30)
Fuel Rail Mounting Bolts14-20 (19-27)
Intake Air Temperature (IAT) Sensor
Except Swift SOHC26-40 (35-54)
Swift SOHC10-12 (14-16)
Oxygen (O2) Sensor
Samurai33-40 (45-54)
Sidekick28-34 (39-46)
Swift33-41 (45-55)
Spark Plugs
Samurai & Swift18-22 (24-30)
Sidekick15-22 (20-30)
Throttle Body Mounting Bolts & Nuts13-20 (18-27)
INCH Lbs. (N.m)
EGRT Sensor72-168 (8.1-18.9)
Fuel Feed Pipe Bolts
Except Swift DOHC71-106 (8.0-11.9)
Swift DOHC(2) *
Fuel Pressure Regulator Screws31 (3.5)
Idle Air Control (IAC) Valve Screws31 (3.5)
Injector Cover Screws
Except Swift SOHC17 (1.9)
Swift SOHC26-36 (2.9-4.1)
Throttle Position Sensor (TPS)
Samurai TBI, Sidekick TBI & Swift DOHC31 (3.5)
Sidekick MPI23-38 (2.5-4.5)
Swift SOHC14-20 (1.5-2.2)
Upper-To-Lower Throttle Body Screws
Except Swift SOHC31 (3.5)
Swift SOHC26-36 (2.9-4.1)
(1) Tighten to 48-132 INCH lbs. (5.4-14.9 N.m). (2) Tighten to 13.5-20 ft. lbs. (18-28 N.m).
(1)Tighten to 48-132 INCH lbs. (5.4-14.9 N.m).
(2)Tighten to 13.5-20 ft. lbs. (18-28 N.m).

TORQUE SPECIFICATIONS