DISASSEMBLY
| CAUTION | Leaving bulb removed from the headlamp housing for a long period of time can deteriorate the performance of the lens and reflector (dirt, clouding). Always prepare a new bulb and have it on hand when replacing a bulb. |
- Rotate headlamp bulb retaining ring counterclockwise and remove. CAUTION: Grasp only the plastic base when handling headlamp bulb. Never touch the glass envelope.
- Turn front turn signal/parking lamp bulb socket counterclockwise to unlock and remove socket.
- Turn front side marker lamp bulb socket counterclockwise to unlock and remove socket.
ASSEMBLY
Installation is in the reverse order of removal.
| CAUTION | After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertightness. |
Scheme 127
- Position front fender protector aside. Refer to [ «FRONT FENDER PROTECTOR: REMOVAL AND INSTALLATION»(ref-375735-S35289178892010102800000) ]
- Disconnect fog lamp connector.
- Turn the bulb counterclockwise to remove it. CAUTION: Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while it is lit or right after being turned off. Burning may result. Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.
