Engine Ignition System - Ignition (H4SO): Removal & Installation Subaru Outback BP рестайлинг

REMOVAL

Spark plug

Refer to "SPECIFICATION" for the recommended spark plug. SPECIFICATION, General Description .>

Scheme 17

Scheme 18

Scheme 19

1. Disconnect the ground cable from the battery.
2. Remove the air cleaner case. REMOVAL , Air Cleaner Case .>
3. Remove the spark plug cords by pulling the boot. (Do not pull the cord itself.)
4. Remove the spark plug with a spark plug socket.

Scheme 20

Scheme 21

1. Remove the battery. REMOVAL .>
2. Remove the spark plug cords by pulling the boot. (Do not pull the cord itself.)
3. Remove the spark plug with a spark plug socket.

INSTALLATION

Install in the reverse order of removal.

Tightening torque

8 N.m (0.82 kgf-m, 5.9 ft-lb)