Home ReviewsRefund Car not listed?
Home/Subaru/Outback/Subaru Outback BP рестайлинг (2006-2009)/Repair manual/Exterior Lights/Lighting System: Removal & Installation
Contents Section: Exterior Lights All sections

Lighting System: Removal & Installation Subaru Outback BP рестайлинг

Exterior Lights 6 illustrations ~319 words

INSTALLATION

Install in the reverse order of removal.

  1. Install in the reverse order of removal.
  2. Before installing the steering wheel, be sure to adjust the direction of roll connector with steering. ADJUSTMENT , Roll Connector .>

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Scheme 30

Scheme 30: SEDAN MODEL
Scheme 30: SEDAN MODEL
  1. Remove the trunk side trim cover.
  2. Turn the socket and remove the bulb.

Scheme 31

Scheme 31: WAGON MODEL
Scheme 31: WAGON MODEL
  1. Remove the rear combination light assembly. WAGON MODEL, REMOVAL, Rear Combination Light Assembly .>
  2. Turn the socket and remove the bulb.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Scheme 32

Scheme 32: SEDAN MODEL
Scheme 32: SEDAN MODEL
  1. Remove the trunk side trim cover.
  2. Turn the socket and remove the bulb.

Scheme 33

Scheme 33: WAGON MODEL
Scheme 33: WAGON MODEL
  1. Remove the bulb inspection cover of the rear gate trim.
  2. Turn the socket and remove the bulb.

Install in the reverse order of removal.

Install in the reverse order of removal.

Scheme 34

Scheme 34: SEDAN MODEL
Scheme 34: SEDAN MODEL
  1. Remove the trunk lid trim. TRUNK LID TRIM , REMOVAL, Trunk Room Trim .>
  2. Turn and remove the bulb socket (A).
  3. Remove the bulb.

Scheme 35

Scheme 35: WAGON MODEL
Scheme 35: WAGON MODEL
  1. Remove the license plate light mounting screw (A) and then remove the lens (B).
  2. Remove the bulb.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

Install in the reverse order of removal.

More articles — Lighting System