Onstar ®: Other Subaru Outback BP

CAUTION

1. Wear work clothing, including a cap, protective goggles, and protective shoes during operation.
2. Remove contamination including dirt and corrosion before removal, installation or disassembly.
3. Keep the disassembled parts in order and protect them from dust and dirt.
4. Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.
5. Be careful not to burn your hands, because each part in the vehicle is hot after running.
6. Be sure to tighten fasteners including bolts and nuts to the specified torque.
7. Place shop jacks or safety stands at the specified points.
8. Before disconnecting electrical connectors of sensor or units, be sure to disconnect the ground cable from battery.

GENERAL PURPOSE TOOLS

GENERAL PURPOSE TOOLS SPECIFICATION CHART

Scheme 14

1. Disconnect the ground cable from battery.
2. Remove meter visor. Refer to «REMOVAL»(ref-216280-S26729346242006011800000) .
3. Remove audio body. Refer to «REMOVAL»(ref-216277-S40645579962006011800000) , Radio.
4. Remove VIU from the audio body.