OPERATION
Reproduce the condition under which the problem has occurred as much as possible.
Drive the vehicle at a speed more than 40 km/h (25 MPH) for at least one minute.
Scheme 53
Scheme 54
- After calling up a diagnostic trouble code (DTC), disconnect diagnosis connector terminal 8 from diagnosis terminal.
- Repeat 3 times within approx. 12 seconds; connecting and disconnecting terminal 8 and diagnosis terminal for at least 0.2 seconds each time.
Note. After diagnostics is completed, make sure to clear memory. Make sure only start code (11) is shown after memory is cleared.
See also:
• SPECIFICATIONS