Starter 2.5L: Removal & Installation Subaru Outback BH

Installation

Install in the reverse order of removal.

Tightening torque

1. 50 N.m (5.1 kgf-m, 37 ft-lb)

Installing Starter. Scheme 11

Scheme 12

Scheme 13

Scheme 14

Scheme 15

1. Disconnect battery ground cable. see scheme 9: Disconnecting Battery Ground Cable
2. Disconnect connector from intake air temperature sensor, (if equipped). (Scheme 12): Disconnecting Connector From Intake Air Temperature Sensor, (MT Vehicles)
3. Remove air cleaner case. (Scheme 13): Removing Air Cleaner Case
4. Remove air cleaner case stay. (Scheme 14): Removing Air Cleaner Case Stay, (MT) (Scheme 15): Removing Air Cleaner Case Stay, (AT)
5. If removing starter, see «STARTER»(ref-121721-S25793079922005050200000).

Install in the reverse order of removal.