Home ReviewsRefund
Home/Subaru/Impreza WRX/Subaru Impreza WRX GD/GG рестайлинг (2002-2005)/Repair manual/Engine Cooling System/REMOVAL
Contents Section: Engine Cooling System All sections

REMOVAL Subaru Impreza WRX GD/GG рестайлинг

Engine Cooling System 4 illustrations ~140 words

REMOVAL

WARNINGThe radiator is pressurized. Wait until engine cools down before working on the radiator.

Scheme 162

Scheme 162
Scheme 162

Scheme 163

Scheme 163
Scheme 163
  1. Drain the coolant about 3.0 (3.2 US qt, 2.6 Imp qt). See «DRAINING OF ENGINE COOLANT»(/subaru/impreza-wrx/gdgg-2002-2005/remont/cooling-fan/#engine-cooling-system) , Replacement, Engine Coolant.
  2. Remove the air cleaner upper cover and air intake boot. See «REMOVAL»(/subaru/impreza-wrx/gdgg-2002-2005/remont/mechanical/#air-intake-system-h4dotc) , Air Cleaner.
  3. Remove the air cleaner element.
  4. Disconnect the engine coolant hoses from the coolant filler tank.
  5. Remove the bolts and nut which install coolant filler tank.
  6. Disconnect the engine coolant hose which connects the under side of coolant filler tank.
  7. Remove the coolant filler tank.

Scheme 164

Scheme 164: INSTALLATION
Scheme 164: INSTALLATION
  1. Install in the reverse order of removal. Tightening torque: T1: 19 N.m (1.9 kgf.m, 13.7 ft.lb) T2: 21 N.m (2.1 kgf.m, 15.2 ft.lb)
  2. Fill engine coolant, see «FILLING OF ENGINE COOLANT»(/subaru/impreza-wrx/gdgg-2002-2005/remont/cooling-fan/#engine-cooling-system) , REPLACEMENT, Engine Coolant.

Scheme 165

Scheme 165: INSPECTION
Scheme 165: INSPECTION