SPECIAL TOOL
SPECIAL TOOL DESCRIPTION CHART ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS 398477701 HANDLE Used for installing the front and rear bearing races. 398477702 DRIFT Used for press-fitting the bearing race (front) of the differential carrier. 398217700 ATTACHMENT SET Stand for rear differential carrier disassembly and assembly. 498447120 INSTALLER Used for installing the front oil seal. 498427200 FLANGE WRENCH Used for preventing rotation of companion flange when loosening and tightening self-lock nut. 398467700 DRIFT Used for removing drive pinion shaft, pilot bearing and front bearing cone. 399780104 WEIGHT Used for installing the front bearing cone, pilot bearing and companion flange. 899580100 INSTALLER Used for press-fitting the front bearing cone and pilot bearing. 899904100 STRAIGHT PIN REMOVER Used for removing pinion shaft lock pin. 498247001 MAGNET BASE Used for measuring backlash between side gear and pinion, and hypoid gear. Used together with DIAL GAUGE (498247100). 498247100 DIAL GAUGE Used for measuring backlash between side gear and pinion, and hypoid gear. Used together with MAGNET BASE (498247001). 398507704 BLOCK Used for adjusting pinion height and preload. 398177700 INSTALLER Used for installing the rear bearing cone. 398457700 ATTACHMENT Used for removing the side retainer. 398477703 DRIFT 2 Used for press-fitting bearing race (rear) of differential carrier. 398437700 DRIFT Used for installing the side oil seal. 398507702 DUMMY SHAFT Used for adjusting drive pinion height and preload. 398507703 DUMMY COLLAR Used for adjusting drive pinion height and preload. Used for installing the front bearing cone. 398517700 REPLACER Used for removing rear bearing cone. 398487700 DRIFT Used for press-fitting side bearing cone. 398507701 DIFFERENTIAL CARRIER GAUGE Used for adjusting drive pinion height. 398527700 PULLER ASSY Used for removing front oil seal. Used for removing side bearing cup. 28099PA090 OIL SEAL PROTECTOR Used for installing the rear drive shaft to the rear differential. For oil seal protection 28099PA100 DRIVE SHAFT REMOVER Used for removing the rear drive shaft from rear differential. 399703600 PULLER ASSY Used for removing companion flange. 899874100 INSTALLER Used for installing the companion flange. 18759AA000 PULLER ASSY Used for removing the differential side bearing cone. 398417700 DRIFT Used for installing side bearing race. 41399FG001 SPECIAL TOOL ASSY Used for removing and installing the rear differential mount bushing. Use (1), (3), (5), (6), (7), (8) and (9) for removal. Use (2), (4), (5), (6), (7), (8) and (9) for installation. SPECIAL TOOL A (41399FG010) SPECIAL TOOL B (41399FG020) SPECIAL TOOL C (41399FG031) SPECIAL TOOL D (41399FG041) SPECIAL TOOL SLEEVE (41399FG050) SPECIAL TOOL RING (41399FG061) SPECIAL TOOL NUT (41399FG070) SPECIAL TOOL BEARING (41399FG080) SPECIAL TOOL SHAFT (41399FG091) 41399FG010 SPECIAL TOOL A Used for removing the rear differential mount bushing. For combination of tools for removal, refer to list above . 41399FG020 SPECIAL TOOL B Used for installing the rear differential mount bushing. For combination of tools for installation, refer to list above . 41399FG031 SPECIAL TOOL C Used for removing the rear differential mount bushing. For combination of tools for removal, refer to list above . 41399FG041 SPECIAL TOOL D Used for installing the rear differential mount bushing. For combination of tools for installation, refer to list above . 41399FG050 SPECIAL TOOL SLEEVE Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to list above . 41399FG061 SPECIAL TOOL RING Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to list above . 41399FG070 SPECIAL TOOL NUT Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to list above . 41399FG080 SPECIAL TOOL BEARING Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to list above . 41399FG091 SPECIAL TOOL SHAFT Used for removing and installing the rear differential mount bushing. For combination of tools for removal and installation, refer to list above