Home ReviewsRefund
Home/Subaru/Forester/Subaru Forester SH (2007-2011)/Repair manual/Transmission Control Systems/A/t & M/t Control Systems: Adjustments
Contents Wiring diagrams Section: Transmission Control Systems All sections

A/t & M/t Control Systems: Adjustments Subaru Forester SH

Transmission Control Systems ~127 words

ADJUSTMENT

  1. Set the vehicle on a lift.
  2. Shift the select lever to "N" range.
  3. Lift up the vehicle.
  4. Remove the rear exhaust pipe and muffler. Non-turbo model Refer to «REMOVAL»(ref-325320-S35059142112009071800000) , Rear Exhaust Pipe . Refer to «REMOVAL»(ref-325320-S22382758332009071800000) , Muffler . Turbo model Refer to «REMOVAL»(ref-325336-S21151896522009071800000) , Rear Exhaust Pipe. Refer to «REMOVAL»(ref-325336-S04910540732009071800000) , Muffler .
  5. Remove the heat shield cover.
  6. Loosen the adjusting nuts on both sides.
  7. Turn adjusting nut B until it lightly touches the connector.
  8. Set a spanner wrench to adjusting nut B so that it does not rotate, and then tighten the adjusting nut A.
  9. After the completion of adjustment, confirm that the select lever operates normally at all ranges.
  10. Install in the reverse order of removal.

More articles — A/t & M/t Control Systems