Home/Subaru/Forester/Subaru Forester SG (2002-2005)/Repair manual/Removal & Installation/Engine Controls - Removal & Installation - Forester: Specif…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Removal & Installation - Forester: Specifications Subaru Forester SG

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Drain Filter13 (18)
Drain Valve13 (18)
ECT Sensor13 (18)
EVAP Canister17 (23)
Heated Oxygen Sensor15 (20)
Intake Manifold Ground Terminal13 (19)
Intake Manifold Resonator Chamber24-26 (32-35)
Knock Sensor17 (23)
Power Steering Pump Bolts15-16 (20-22)
Purge Control Solenoid Valve14 (19)
Throttle Body Mounting Bolts15-16 (20-22)
INCH Lbs. (N.m)
Air Assist Injector Solenoid56.7 (6.4)
Atmospheric Pressure Sensor14.2 (1.6)
Camshaft Position Sensor Support56.7 (6.4)
Camshaft Position Sensor56.7 (6.4)
Crankshaft Position Sensor56.7 (6.4)
Fuel Injector Pipe Bolt44.3 (5.0)
Fuel Pump Mounting Nuts39.0 (4.4)
Fuel Tank Pressure Sensor Bolt48 (5.4)
Idle Air Control Solenoid Valve14 (1.6)
Intake Manifold Pressure Sensor14 (1.6)
TP Sensor Screws14 (1.6)

TORQUE SPECIFICATIONS (FORESTER)