REMOVAL & INSTALLATION
| WARNING | To avoid injury from accidental front seat side air bag deployment, read and carefully follow all WARNINGS and SERVICE PRECAUTIONS. |
Note. For information on air bag DIAGNOSIS & TESTING or DISPOSAL PROCEDURES, see AIR BAG SERVICE & REPAIR MANUAL, DOMESTIC & IMPORTED MODELS.
- While pressing headrest lock button, remove headrest. Tilt backrest forward. Adjust seat to full forward position.
- Remove bolt cover at rear of slide rail. Remove 2 bolts at rear sides of seat rails.
- Adjust seat to full rear position. Remove 2 bolts at front seat rails.
- Disconnect negative battery cable. Disconnect side air bag electrical connector under seat (if equipped). see scheme 2 Disconnect seat heater and seat belt warning electrical connectors (if equipped). see scheme 3
- Remove front seat from vehicle. To install, reverse removal procedure. Install and tighten four slide rail bolts. Ensure smooth operation of seat assembly.
