Home/Subaru/Forester/Subaru Forester SF (1997-2000)/Repair manual/Automatic Trans/Removal & Installation - A/t: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Removal & Installation - A/t: Specifications Subaru Forester SF

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Crossmember-To-Body Bolts40-61 (54-83)
Crossmember-To-Transaxle Bolts20-35 (27-47)
Center Exhaust Pipe-To-Hanger Bolt18-26 (25-35)
Center Exhaust Pipe-To-Rear Pipe9-17 (13-23)
Center Support Bearing Bracket35-42 (47-57)
Engine Mount Bracket Bolts27-49 (36-67)
Engine Mount-To-Body Bolts27-49 (36-67)
Exhaust Pipe-To-Engine18-26 (25-35)
Exhaust-To-Muffler29-42 (39-57)
Lower Ball Joint Retaining Bolts29-44 (39-59)
Lower Control Arm-To-Crossmember Bolts61-83 (83-113)
Driveshaft-To-Rear Companion Flange Bolts17-29 (23-39)
Shift Selector Cable Bracket9-17 (13-23)
Stabilizer Clamp15-21 (21-29)
Starter Bolt & Nut27-34 (36-44)
Torque Converter-To-Drive Plate Bolts17-20 (23-27)
Torque Rod
Engine Side32-40 (44-54)
Body Side35-49 (47-67)
Torque Strut Bolt31-46 (42-62)
Transaxle Mount-To-Body Bolts27-49 (36-67)
Transaxle-To-Engine Bolts34-40 (46-54)
Transverse Link-To-Crossmember54-69 (73-94)

TORQUE SPECIFICATIONS