Home ReviewsRefund
Home/Subaru/Baja/Subaru Baja I (2002-2006)/Repair manual/Cooling System (Mechanical)/Engine Cooling System (H4DOTC): Other
Contents Wiring diagrams Section: Cooling System (Mechanical) All sections

Engine Cooling System (H4DOTC): Other Subaru Baja I

Cooling System (Mechanical) 2 illustrations ~139 words

CAUTION

  1. Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
  2. Remove contamination including dirt and corrosion before removal, installation or disassembly.
  3. Keep the disassembled parts in order and protect them from dust or dirt.
  4. Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replacement.
  5. Be careful not to burn your hands, because each Part in the vehicle is hot after running.
  6. Be sure to tighten fasteners including bolts and nuts to the specified torque.
  7. Place shop jacks or safety stands at the specified points.
  8. Before disconnecting electrical connectors of sensors or units, be sure to disconnect the ground cable from battery.

Scheme 174

Scheme 174: PREPARATION TOOL
Scheme 174: PREPARATION TOOL

Scheme 175

Scheme 175: SCHEMATIC
Scheme 175: SCHEMATIC

DETECTING CONDITION

  1. Engine coolant temperature is above 95°C (203°F).
  2. Vehicle speed is below 19 km/h (12 MPH).

More articles — Engine Cooling System (H4DOTC)