Shift Lock Control System: Removal & Installation Saturn Aura I

Removal Procedure

1. Remove the automatic transaxle control assembly. Refer to «Transmission Control Replacement»(ref-301483-S32908977002008101700000) .
2. Disconnect the Shift Lock Control Solenoid connector from the solenoid.
3. Using a flat-blade screwdriver or similar tool pry the solenoid off of the ball-sockets on the solenoid plunger and solenoid body.
4. Remove the shift lock control solenoid.

Installation Procedure

1. Route the shift lock control solenoid through the opening in the front of the control assembly.
2. Attach the ball-sockets to the control assembly body and the shift-lock control lever.
3. Connect the electrical connector to the Shift Lock Control Solenoid.
4. Install the automatic transaxle control assembly. Refer to «Transmission Control Replacement»(ref-301483-S32908977002008101700000) .