Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .
Reference Information
Schematic Reference
Outside Rearview Mirror Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Outside Mirror Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-302317-S14465820352008102100000)
- «Connector Repairs»(ref-302317-S07938571952008102100000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-302317-S07813738172008102100000)
- «Wiring Repairs»(ref-302317-S36649915442008102100000)
Scan Tool Reference
Control Module References for scan tool information.
Circuit/System Verification
- Ignition ON, press the rear window defogger switch. Verify the rear window defogger turns ON and the rear window becomes warm. If the rear window defogger does not turn on, refer to «Rear Window Defogger Malfunction»(ref-302293-S01043768272008102100000) .
- Verify both the left and right outside mirror glass become warm.
Repair Procedures
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Outside Rearview Mirror Glass Replacement
Schematic Reference
Inside Rearview Mirror Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Automatic Day-Night Mirror Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-302317-S14465820352008102100000)
- «Connector Repairs»(ref-302317-S07938571952008102100000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-302317-S07813738172008102100000)
- «Wiring Repairs»(ref-302317-S36649915442008102100000)
Scan Tool Reference
Control Module References for scan tool information.
- Ignition ON, headlamps ON, vehicle in PARK, cover the front light sensor with a towel or other suitable item. Shine a flashlight at the rear light sensor while observing the inside rearview mirror face. The inside rearview mirror face should dim.
- Remove the towel from the inside rearview mirror and remove the flashlight. Verify the inside rearview mirror face returns to its normal bright state.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Inside Rearview Mirror Replacement
Schematic Reference
Outside Rearview Mirror Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Outside Mirror Description and Operation
Electrical Information Reference
- «Circuit Testing»(ref-302317-S14465820352008102100000)
- «Connector Repairs»(ref-302317-S07938571952008102100000)
- «Testing for Intermittent Conditions and Poor Connections»(ref-302317-S07813738172008102100000)
- «Wiring Repairs»(ref-302317-S36649915442008102100000)
Scan Tool References
Control Module References for scan tool information.
- Ignition ON, with the mirror selector switch in the DRIVER position, command the mirrors UP, DOWN, LEFT, and RIGHT using the mirror directional switch. The driver mirror should move in the commanded direction.
- Ignition ON, with the mirror selector switch in the PASSENGER position, command the mirrors UP, DOWN, LEFT, and RIGHT using the mirror directional switch. The passenger mirror should move in the commanded direction.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
- «Front Side Door Window Switch Replacement»(ref-302293-S26392170212008102100000)
- «Power Mirror Replacement»(ref-302321-S14360763132008102100000)
Power Mirror System Controls
The outside rearview mirror switch is a four position directional switch: Up, Down, Left and Right.
The mirror select switch is a three position switch: Left, Neutral, and Right.