Steering Wheel Switch
| WARNING | Read the Safety and handling directions, see SAFETY AND HANDLING INSTRUCTIONS and BEFORE CHANGING A CONTROL MODULE before starting work. |
Scheme 344
- Remove the Airbag, driver, see «AIRBAG, DRIVER (333D)»(ref-278646-S04247036182008013000000) .
- Unplug the steering wheel switch connector.
- Remove the screws. Remove the controls, see «82 93 474 REMOVAL TOOL»(ref-278645-S35740788892008013000000) .
- Remove the cable from the cable mounting.
Scheme 345
- Fit the steering wheel controls.
- Fit the cable in the cable mounting.
- Fit the screws to the steering wheel controls.
- Plug in the connector.
- Fit the Airbag, driver, see «AIRBAG, DRIVER (333D)»(ref-278646-S04247036182008013000000)
Scheme 346
- Empty the washer fluid reservoir.
- Raise the car.
- Unplug the level sensor connector.
- Withdraw the level sensor from the washer fluid reservoir.
Scheme 347
- Press the level sensor into the washer fluid reservoir with the float hanging down.
- Plug in the level sensor connector.
- Lower the car.
- Fill with washer fluid.