Torque And Power Graphs
| B205E | B205E, 185 hp | B235E | B235L | B235R | ||
|---|---|---|---|---|---|---|
| Performance, 0-100 km/h | Sec. | 4D aut: 11.6 | 4D aut: 9.5 | 4D aut: 9.5 | 4D aut: 8.7 | 4D aut: 8.2 |
| 4D man: 9.8 | 4D man: 8.3 | 4D man: 8.3 | 4D man: 7.8 | 4D man: 6.9 | ||
| 5D aut: 12.5 | 5D aut: 9.9 | 5D aut: 9.9 | 5D aut: 9.2 | 5D aut: 8.5 | ||
| 5D man: 10.2 | 5D man: 8.8 | 5D man: 8.8 | 5D man: 8.3 | 5D man: 7.3 | ||
| Top speed | Km/h | 4D aut: 210 | 4D aut: 225 | 4D aut: 225 | 4D aut: 230 | 4D aut: 250 |
| 4D man: 215 | 4D man: 230 | 4D man: 230 | 4D man: 235 | 4D man: 250 | ||
| 5D aut: 205 | 5D aut: 220 | 5D aut: 220 | 5D aut: 225 | 5D aut: 245 | ||
| 5D man: 210 | 5D man: 225 | 5D man: 225 | 5D man: 230 | 5D man: 245 |
TORQUE AND POWER GRAPHS
Tightening Torques
| Torque (Nm) | Torque (lbf ft) | Dimension | |
|---|---|---|---|
| Exhaust manifold | 25 | 19 | M8 |
| Drain plug, engine oil | 25 | 19 | M14x1.5 |
| Idler sprocket, balancer-shaft chain | 25 | 19 | M8 |
| Cylinder head, stage I | 40 | 30 | M12 |
| Step II | 60 | 44 | |
| Step III | Tighten a further 90° | Tighten a further 90° | |
| Intake manifold | 22 | 16 | M8 |
| Camshaft bearing caps | 15 | 11 | M8 |
| Balancer shaft sprockets | 22 | 16 | M8 |
| Camshaft sprockets | 63 | 47 | M10 |
| Timing chain tensioner | 63 | 47 | M22 |
| Piston cooling nozzle | 18 | 13 | M10 |
| Drive plate with Thread locking adhesive, Loctite 270 | 90 Tighten a further 60° + 15° | 66 Tighten a further 60° + 15° | M10x1.25 |
| Hub centre-nut | 230 | 170 | |
| Oil filter | 10 | 7 | |
| Oil hoses for oil cooler | 8 | 6 | M6 |
| Oil sump | 22 | 16 | M8 |
| Plug for timing chain tensioner | 22 | 16 | |
| Plug for oil pressure reducing valve | 30 | 22 | |
| Plug for oil cooler thermostat | 60 | 44 | |
| Main bearing caps | 20 + 70° | 15 + 70° | M12 |
| Throttle body | 8 | 6 | M6 |
| Flywheel with Thread locking adhesive, Loctite 270 | 80 | 59 | M10x1.25 |
| Flywheel with Thread locking adhesive, Loctite 270. From and including VIN 73526434 | 90 Tighten a further 30° + 15° | 66 Tighten a further 30° + 15° | M10x1.25 |
| Thermostat housing | 22 | 16 | M8 |
| Timing cover (all screws) (up to and including engine no. 7006011) | 22 | 16 | M8 |
| Timing cover (all screws) (from and including engine no. 7006012) | 19 | 14 | M8 |
| Turbocharger | 25 | 19 | M8 |
| Ignition discharge module | 11 | 8 | M6 |
| Spark plugs | 28 | 21 | |
| Camshaft cover | 15 | 11 | M8 |
| Crankshaft pulley | 175 | 130 | M16x1.5 |
| Big-end bearing cap with nut | 20 + 70° | 15 + 70° | M9x1 |
| Big-end bearing cap with bolt | 25 + 100° | 18 + 100° | M9x1 |
| Other bolts | 5 | 4 | M5 |
| 10 | 7 | M6 | |
| 20 | 15 | M8 | |
| 40 | 30 | M10 |
TIGHTENING TORQUES SPECIFICATION