Twice: Overview Saab 9-5 I рестайлинг 2

Scheme 202

1. Detach and lift away the LH front seat
2. Lift and fold aside the carpet. Remove the plastic molding as needed.
3. Unplug the connector to the module.
4. Remove 3 plastic nuts and lift out the module.

Scheme 203

1. Position the module and fasten it with the 3 plastic nuts.
2. Plug in the connector on the module.
3. Put the carpet back in place. If necessary, refit the plastic molding.
4. Refit the front seat.
5. After the TWICE control module is replaced, it must be programmed into the car.