Soft top up
The soft top is raised with this switch by pressing and holding it. The SIDC sends a 5V 960 Hz PWM signal with a 27% pulse ratio from pin 4 to pin 14 of the ICM.
This switch can be used to adjust the instrument illumination. The ICM controls the cabin lighting after allowing not only for the rheostat control but also for the light sensor on the SID that measures the backlight. The switch provides the ICM with information on the driver's chosen instrument illumination setting. A PWM signal from pin 4 of the SIDC to pin 14 of the ICM indicates the button (+/-) being pressed. The signal is 5V 960 Hz PWM with a pulse ratio of 45% for the up button (+) and 63% for the down button (-).
Extinguishes the SID, ICM and main instrument unit displays except for the speedometer and reduces the brightness of the button illumination. See NIGHT PANEL . The SIDC sends a 5V 960 Hz PWM signal with a pulse ratio of 36% from pin 4 to ICM pin 14.