Repair manual
Wiring diagrams
Saab 9-3 II Repair Manual
Step-by-step repair and maintenance instructions for the Saab 9-3 II (2002–2008): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
102sections
3011articles
ENManual language
- Cars With Activated Seat Belt Tensioners and/or Side Airbags and Inflatable Curtain/Roll Bars (CV)
- Cars With Activated Seat Belt Tensioners
- Cars With Activated Side Airbags and Inflatable Curtain/Roll Bars (CV)
- Cars With Activated Airbags
- General Safety Rules
- Scrapping Cars With Airbags and Belt Tensioners, 4D
- Scrapping Front Belt Tensioners
- Scrapping Rear Belt Tensioners
- Scrapping Side Airbags
- Scrapping Driver Airbags
- Scrapping Passenger Airbags
- Scrapping Inflatable Curtains
- Welding
- Painting
- Electrical Work
- Work On the Car Body
- Work On the Steering Gear
- Scrapping and Recycling
- In Connection With the Repair of Crashed Cars
- Scrapping Cars With Airbags and Belt Tensioners, CV
- Scrapping Activation Unit, Roll Bar
- Airbag Control Module (331)
- To Fit
- Airbag, Driver (333D)
- Airbag, Passenger (333P)
- Airbag, Side (333Db, 333Pb)
- Airbag, Side (333Db, 333Pb), CV
- Inflatable Curtain (732)
- Inflatable Curtain, 5D (732)
- Activation Unit, Roll Bar (734D, 734P)
- Impact Sensor, Front (332FL, 332FR)
- Impact Sensor, Side, Front (328D, 328P)
- Impact Sensor, Side (328D, 328P), CV
- Impact Sensor, Side, Rear (328RD, 328RP)
- Procedures After Disconnecting the Battery
- Changing Passenger Presence System, CV
- Manual Seat
- Used Pyrotechnic Components
- Equipment
- Checking and Activation
- Background
- Main Components
- ACM (Airbag Control Module)
- Conditions
- Side Impact
- Back-up Power
- Driver Airbag
- Passenger airbag
- Front Impact Sensor
- Inflatable Curtain, 4D
- Inflatable Curtain, 5D
- Inflatable Curtain Gas Generator, 4D
- Inflatable Curtain Gas Generator, 5D
- Side Airbag
- Side Airbag Gas Generator
- Side Impact Sensor
- 4D, 5D
- Function
- CV
- Seat Position Sensor
- Seat-Belt Buckle
- General
- Airbag Warning Lamp
- Message
- Contact Roller
- Calculation Algorithms
- Explanation
- Adaptive Calculation Algorithms
- PPS (Passenger Presence System) control module (591)
- Pressure Sensor, Occupied Seat Cushion, Front Passenger (642)
- Force Sensor, Front Passenger Seat Belt (643)
- Indicator lamp, Passenger Airbag ON/OFF (612a/b)
- Repair
- General Safety Instructions, PPS
- Main Function
- Type
- Connection
- Main Task
- Connect
- Power Supply, Ground and Bus Communication
- Bus Messages, Airbag Control Module (ACM)
- Bus Messages, Passenger Presence System (PPS)
- PPS Sends the Following Information to ACM
- List of Components
- Component List
- Relays
- Fuses
- Connected Components
- Airbag, Side (333D, 333P), 4D
- Airbag, Side (333D, 333P), CV
- Impact Sensor, Side (328D, 328P, 328RD, 328RP)
- PPS Control Module (591)
- Position Sensor, Seat (669D, 669P)
- 4D
- 5D
- 30-Pin Connector
- Control module
- Outputs
- Inputs
- Bus
- SPS Programming
- Add
- Actions When Replacing Electrical Components
- Internal Control Module Faults
- Analog Inputs
- Digital Inputs
- Airbag, LHD (Part 1/2)
- Airbag, LHD (Part 2/2)
- CD Player/Changer, Front (355F)
- CD Player/Changer, Rear (355R), CV
- Main Unit, Radio (353)
- Amplifier, Front Speaker (354F), 4D
- To Fit
- Amplifier, Front Speaker (354F), CV
- Amplifier, Rear Speaker (354R), 4D
- Amplifier, Rear Speaker (354R), CV
- Amplifier, Rear Speaker (354R), 5D
- Infotainment Control Panel, ICM (736)
- Button, Control Panel, Infotainment System, ICM
- Infotainment Control Module
- Steering Wheel Controls
- Display
- Amplifiers and Speakers, 4D
- Amplifiers and Speakers, 5D
- Amplifiers and Speakers, CV
- Antenna, 4D
- Antenna, 5D
- Antenna, CV
- Sound Generator
- Option
- Connection, AUX
- Infotainment, Bus Information
- Main task
- Type
- Connection
- Main Purpose
- Main use
- Activation
- Connect
- List of Components
- Center Dashboard Speaker (266FC)
- Left Dashboard Speaker (266FL)
- Right Dashboard Speaker (266FR)
- Front Left Door Speaker (266LH)
- Subwoofer (266RCW)
- Front Right Door Speaker (266RH)
- Speaker, Rear, RH (266RR)
- Speaker, Woofer, Rear, LH (266RLW)
- Speaker, Rear, LH (266RL)
- Speaker, Woofer, Rear, RH (266RRW)
- Steering Wheel Contact Unit (336)
- Steering Wheel Contact Unit, Horn/Switches (336b)
- Relays
- Entertainment Head Unit (353)
- Amplifier, Front Speakers (354F)
- 4D/CV
- 5D
- Front CD Player/Changer (355F)
- CD Changer, Rear (355R)
- Connection, Mobile Phone (375)
- Antenna Amplifier, Radio (624)
- Converting Connector, Radio Antenna (624a)
- Antenna Amplifier, Radio, CV (624b)
- Radio Antenna Amplifier, 5D (624RL)
- Radio Antenna Amplifier, 5D (624RR)
- Switch Unit, Steering Wheel (633)
- Filter, Antenna Ground (644)
- Fuses
- Connection, AUX (771)
- Connector H8-1
- Connector H8-3
- Connector H8-10
- Connector H8-17
- Connector H10-7
- Connector H13-1
- Connector H13-2
- Connector H33-1
- Connector H102-1
- Connected Components
- Speakers, Prestige 300
- Amplifier, Rear Speakers (354R)
- CD Player/Changer, Front
- Antenna Amplifier, Radio (624), 4D
- Antenna Amplifier, Radio (624 RL/RR), 5D
- Bypass Unit, Antenna Amplifier (624a), CV
- Radio Antenna (364), CV
- Remember
- K8A
- K8B
- O-Bus
- K12
- Scope
- AMP 1
- AMP 2
- General
- Bus
- Control module
- Outputs
- Inputs
- The Action Involves the Following
- SPS Programming
- Add
- Actions When Replacing Electrical Components
- Internal Control Module Faults
- Analog Inputs
- Digital Inputs
- Conditions
- To fit
- Topping up
- Manual release of solenoid, selector lever, SHIFT LOCK
- Checklist, complete before changing gearbox
- Principal components
- Shifting
- Safety features
- Special gear change program
- Electronic control system
- Transmission control module, TCM
- Shift lever module, SLM
- Speed (rpm) sensor
- Gear selector position sensor
- Steering wheel buttons
- Hydraulic control system
- Oil pump
- Valve housing
- B207E, B207L
- B207R
- Use recommendations
- Selector lever position P
- Selector lever position R
- Selector lever position N
- Selector lever position D
- Gear selector position M
- Towing
- Temperature program 1
- Temperature program 1 will not function when
- Disengages when
- Temperature program 2
- Temperature program 2 will not function when
- Special gear change programs are deactivated if
- Differential protection system, DPS
- Electronic gear lever detent
- Electronic over-revving cut-out
- Limp home
- Accelerator position
- Kickdown function
- Function
- Planetary gear
- Animation
- Main use
- Type
- Activation
- Power supply, ground and bus communication
- TCM, bus information
- Main task
- Connect
- List of components
- Horn switch (41)
- Start inhibitor switch, automatic in 245 (77)
- Selector lever position indicator LEDs (91)
- Transmission range switch, automatic (245)
- Steering wheel contact unit, horn/switches (336b)
- Relays
- Solenoid, gear selector, SHIFT LOCK (439)
- TCM, FA 57 (502a)
- Solenoid valves, TCM (531)
- Speed sensor, gearbox input shaft, FA 57 (532)
- Speed sensor, gearbox output shaft, FA 57 (533)
- SID (541)
- Switch unit, steering wheel (633)
- Gear selector control module (726)
- Connector H4-3
- Connector H24-2 (T8)
- Connector H102-1
- Connected components
- General data
- Gearbox
- Control module
- Speed sensor, output shaft, transmission casing (533)
- Speed sensor, input shaft, transmission casing (532)
- Shift solenoid, S1-S5 (531)
- Oil pressure solenoid, SLU (531)
- Oil pressure solenoid, SLS (531)
- System pressure solenoid, SLT (531)
- Lamp, selector lever position indicator illumination (91)
- Control module, TCM (502)
- Overall ratio
- B207E/L
- Scope
- Points to remember
- Table connector B
- "System information" menu
- SPS programming
- Add
- General
- Bus
- Internal control module faults
- Analog inputs
- Digital inputs
- Outputs — Part 1
- Outputs — Part 2
- Checking/Adjusting the oil level
- Checking/Adjusting the oil level B284
- Fitting centering tool, subframe - engine
- Adjusting (after subframe is fitted to body)
- Lock up
- Cooling system
- Adaptation
- Fuses
- TCM control module, AF40 (502b)
- Relay, +50 (517)
- Connector H10-2
- Connector H24-5 (EDC16)
- Connector H24-6 (ME9)
- Pin configuration
- System pressure
- 83 90 270 Sliding hammer
- To Fit
- Fit — Part 1
- Fit — Part 2
- Check the engine oil pressure
- Checks
- Procedures after disconnecting the battery
- Petrol Engine
- Cylinder Block
- The Saab Balancer Shaft System
- Balancer Shaft Drive
- Camshafts
- Background
- Cylinder Bore
- General Data
- Piston Class and Cylinder Travel
- Piston Rings
- Piston Pin
- General Data B207L
- Crankshaft Journal Diameter B207L
- Main Bearing Journal Diameter B207L
- Valve Guides
- Tappets
- Valve Springs
- Cam Lift
- Valve Timing
- Power Train
- B207E
- B207L
- B207R
- B207S
- Fuel Consumption
- To fit
- Check the engine oil pressure
- Petrol engine
- Cylinder block
- Crankshaft
- Piston
- Cam transmission
- CVCP, general
- Camshaft, general
- Camshaft, idling
- Camshaft, moderate load
- Camshaft, high engine speed and high load
- CVCP mechanism
- General
- Oil sump
- Oil pump
- Oil filter
- Heat exchanger
- Engine oil level switch (243)
- Z18XE
- Z19DT
- Z19DTH
- Pressure sensor, engine oil (696)
- Cylinder bore
- General data
- Piston pin
- Connecting rod
- General data B284
- Crankshaft journal diameter B284
- Main bearing journal diameter B284
- Valve guides
- Tappets
- Valve springs
- Oil pressures
- Power train
- B284E
- B284L
- Recommended oil quality
- Background
- Engine performance
- Fuel economy
- Useful life
- Environmental aspect
- Service and oil change
- Recommendation
- 32 025 060 Tool kit
- List of components
- Front Brake Disc
- Disc Back-Plate, Front
- Disc Back-Plate, Rear
- To Fit
- Bleeding the Brake System
- Brake Servo, B284 RHD
- Procedures After Disconnecting the Battery
- System Components
- Vacuum Pump, B207
- Vacuum Pump, B284
- Brake Caliper, Front
- Brake Caliper, Rear
- Main use
- Type
- Main task
- Connect
- Relays
- List of Components
- Connected components
- Front wheel brakes
- Rear wheel brakes
- Front
- Rear
- Brake Pads
- Brake Caliper
- Brake Pad Wear
- Calculation of remaining driving distance in km
- Calculation of Remaining Brake Pad in Percentage Terms (%)
- Vacuum Pump, Diesel Engine
- Conditions
- The action involves the following
- SPS programming
- Add
- Front wheel speed sensor (298FL, FR)
- Rear wheel speed sensor (298RL, RR)
- Hydraulic unit, TCS/ESP, all engines and control modules for B284 LHD
- Yaw sensor (658)
- To fit
- Hydraulic unit, TCS/ESP, bracket
- EBD (Electronic Brake-force Distribution)
- CBC (Cornering Brake Control) in ESP
- ABS (Anti-lock Braking System)
- The ABS system assists the driver with regards to
- TCS (Traction Control System) in TCS control module
- TCS (Traction Control System) in ESP control module
- ESP (Electronic Stability Program)
- Self-check
- Expanded function in ESP for B284
- Function
- Compression stroke
- Return stroke
- ABS mode
- TCS and ESP mode in the ESP control module
- CBC (Cornering Brake Control) in the ESP control module
- CBC requires information regarding
- CBC uses
- ABS function
- Braking force/Tyre slip
- Lateral force/Tyre slip
- ABS modulation
- PHASE 1 Pressure increase
- PHASE 2 Pressure holding
- PHASE 3 Pressure decrease
- PHASES 1-3
- TCS function with TCS control module
- TCS regulation
- Low speed
- High speed
- TCS regulation with ESP system
- Phase 1 Pressure build-up on both front wheels (filling pulse and holding pressure) The driver does not brake
- Phase 2 Pressure increase in the circuit with wheelspin
- Phase 3 Pressure reduction in the circuit with wheelspin
- Phase 4 Release
- On cars equipped with ESP
- Braking
- Phase 1 Pressure build-up for all four wheels (filling pulse and maintaining pressure). Driver does not brake
- Phase 2 Pressure increase on wheels under ESP regulation
- Phase 3 Pressure reduction on wheels under ESP regulation
- Driver braking
- Warnings and indicator lights
- Main use
- Type
- Connection
- Connection (not for control module)
- Power supply, ground and bus communication
- The control module contains
- Valve block
- Steering wheel angle sensor
- TCS, bus information
- ESP, bus information
- Ignition Switch Module (20)
- Main task
- Connect
- List of components
- Brake light switch (29)
- Wheel speed sensor, front left (298FL)
- Wheel speed sensor, front right (298FR)
- Wheel speed sensor, rear left (298RL)
- Wheel speed sensor, rear right (298RR)
- Relays
- TCS control module (382)
- Main instrument display panel (540)
- SID (541)
- ESP control module (671)
- Infotainment control panel (736)
- SID control panel (737)
- Connector H10-4
- Connector H24-1
- Connector H33-1
- Connector H102-1
- Connected components
- Control module, Trionic T8 (589)
- EDC16 control module (595)
- Scope
- Remember
- General
- Bus
- Control module
- Outputs
- Inputs
- Procedures before dismantling the control module
- Actions when replacing electrical components
- Internal control module faults
- Analog inputs
- Digital inputs
- Conditions
- P-bus and I-bus
- O-bus
- General
- I-bus, principles of communication
- P-bus, principles of communication
- P-bus and I-bus, message transmission and reception
- Permanent bus faults
- Intermittent bus faults
- Fault counter
- O-bus ring break position
- C-cable
- Examples of C-cables
- Function chains
- 1. Vehicle speed
- 2. Immobilization
- 3. Steering column lock
- 4. Central locking system
- Main task
- Type
- Connect
- List of components
- Control Module, Sunroof (182)
- Automatic Climate Control (216)
- Airbag Control Module (331)
- Relays
- Entertainment Head Unit (353)
- Amplifier, Front Speakers (354F)
- 4D/CV
- 5D
- Front CD Player/Changer (355F)
- CD Changer, Rear (355R)
- Electrically Adjustable Driver's Seat With Memory Control Module (357DK)
- TCS Control Module (382)
- Data Link Connector 16 Pin, CARB (445)
- 4D
- CV
- TCM, FA 57 (502a)
- TCM Control Module, AF40 (502b)
- Main Instrument Display Panel (540)
- Control Module, STC (565)
- Control Module, Window Lift, Rear, LH (575RL)
- Control Module, Window Lift, Rear, RH (575RR)
- Control Module, Trionic, B207, Switch A (589A)
- EDC16 Control Module, 4-cyl. Diesel, Connector B (595B)
- Auxiliary/Parking Heater (597)
- Control Module, Motronic E9, B284, Switch B, (608B)
- Yaw Sensor (658)
- Automatic Headlamp Levelling, AHL (664)
- ESP Control Module (671)
- Fuses
- Control Module, Door, Front, Left-Hand (702)
- SOP - Rev.1 (702D)
- From and including Rev.1 (702D/P)
- Control Module, Door, Front, Right-Hand (702)
- SOP - Rev.1 (702P)
- From and including Rev.1 (702P/D)
- Control Module, Rear Left Door (702RL)
- Control Module, Rear Right Door (702RR)
- Control Module, Simtec, Z18XE, Switch B (705B)
- Body Control Module (707)
- Accessory Connector (711)
- Gear Selector Control Module (726)
- DVD Unit (729)
- Infotainment Control Panel (736)
- Power Steering System Unit (745)
- Z18XE
- Z19
- Connector H2-6
- Connector H2-9
- Connector H2-10
- Connector H2-11
- Connector H2-14
- Connector H8-8
- Connector H10-2
- Connector H13-1
- Connector H13-2
- Connector H16-1
- Connector H16-2
- Connector H40-1
- Connector H40-2
- Connector H102-1
- Connected components
- Control module
- Outputs
- Inputs
- SPS programming
- Add
- Actions when replacing electrical components
- Internal control module faults
- Analog inputs
- Digital inputs
- Procedures after disconnecting the battery
- To fit
- Procedures after disconnecting the battery
- Charging the battery
- T8
- Simtec
- EDC16 16V
- EDC16 8V
- SID (541)
- Control module, Trionic, B207, switch A (589A)
- Control module, Trionic, B207, switch B (589B)
- Trionic
- Connected components
- General
- Bus
- Battery
- Generator
- Warning indicator for charging
- Stator
- Rotor with slip rings
- Integral fans
- Rectifier
- Voltage regulator
- Internal circuitry
- Charging, bus information
- Main task
- Type
- Connection
- To fit
- Procedures after disconnecting the battery
- Charging the battery
- Battery
- Generator
- Warning indicator for charging
- Stator
- Rotor with slip rings
- Integral fans
- Rectifier
- Voltage regulator
- Internal circuitry
- Charging, bus information
- Main task
- Type
- Connection
- Handling
- Generator (2)
- Z18XE
- Z19DT
- Z19DTH
- Starter motor (4)
- Airbag control module (331)
- Connect
- Relays
- List of components
- SID (541)
- Control module, Trionic, B207, switch A (589A)
- Control module, Trionic, B207, switch B (589B)
- Control module, EDC16, 4-cyl diesel, contact A, engine (595A)
- EDC16 Control module, 4-cyl. diesel, connector B (595B)
- Control module, Motronic E9, B284, switch A, engine (608A)
- Control module, Motronic E9, B284, switch B, (608B)
- Battery disconnect switch (700)
- Control module, Simtec, Z18XE, switch A (engine) (705A)
- Control module, Simtec, Z18XE, switch B (705B)
- Connected components
- Grounding point G25
- Battery, 85 Ah
- Packaging
- Transport
- Directives
- General
- Bus
- Filling
- A/C system leakage tracing
- Filling and adjusting the compressor oil
- Conditions
- Functionality check of the A/C system's pressure sensor
- Climate control unit
- Evaporator
- Evaporator's high and low-pressure pipes, B207
- Evaporator high and low pressure pipes, Z19DT/DTH
- Evaporator's high and low-pressure pipes, B284
- Condenser
- Condenser, B284
- A/C compressor, B207
- Receiver, B207
- Receiver, Z19DT/DTH
- Receiver, B284
- Compressor's high and low-pressure pipes, B207
- Compressor high and low pressure pipes, Z19DT/DTH
- Compressor's high and low-pressure pipes, B284
- Receiver high pressure pipe, Z19DT/DTH
- Receiver, high pressure pipe, B284
- Electromagnetic clutch, A/C compressor
- Service position, windscreen wipers
- To fit
- A/C system
- Cars with ACC
- P-bus and I-bus
- Climate zones
- Air mixture, MCC
- Air mixture, ACC
- Air distribution, MCC
- Air distribution, ACC
- Defroster setting
- Panel setting
- Floor setting
- TRI setting
- BI mode
- Heating mode
- Air recirculation
- Fresh-air filter
- Particle air filter
- Combination filter
- Refrigerant
- Cooled glove box
- A/C request
- Pressure sensor
- Compressor
- Condenser, Z18, Z19, B207
- Receiver
- Expansion valve
- Pipes, hoses and sealing washers
- Service connections
- Main task
- Type
- Connection, petrol engine B207, B284
- Connection, Z18XE petrol engine
- Connection, Z19DT/DTH diesel engine
- Principal use
- T8
- Function
- Simtec
- Bus messages, A/C
- A/C compressor relay (156)
- Z18XE
- Z19
- Switch, A/C (169)
- Compressor, A/C (170)
- Automatic Climate Control (216)
- Connect
- Relays
- List of components
- Control panel, manual climate control (504)
- SID (541)
- Control module, Trionic, B207, switch A (589A)
- EDC16 Control module, 4-cyl. diesel, connector B (595B)
- Control module, Motronic E9, B284, switch B, (608B)
- Pressure sensor A/C (620)
- Control module, Simtec, Z18XE, switch A (engine) (705A)
- Control module, Simtec, Z18XE, switch B (705B)
- Body Control Module (707)
- Fuses
- Connector H7-1
- Connector H10-15
- Connector H10-16
- Connector H10-17
- Connector H11-1
- Connector H27-1
- Connected components
- R134a
- Compressor (170), Z18, B284
- Compressor oil
- Compressor (170), Z19 and B207
- MCC unit (504)
- Temperature
- Air distribution
- Fan speed
- A/C
- Electrically heated rear window and rear view mirrors
- Parking heater
- Main function
- Connection
- MCC
- Power supply, ground and bus communication
- Motor, ventilation fan (36)
- Motor, air recirculation flap (38)
- Motor, air distribution damper (221)
- Motor, air mixing damper, MCC (222)
- Ventilation fan control (220)
- General
- Bus
- ACC unit (216)
- Engine not running
- Engine is running
- Ignition off
- Temperature, separate for passenger and driver
- Auto
- Temperature increase or decrease
- Defrost
- Floor/panel or combination, even with air directed at the windshield
- Electrically heated rear window
- Fan
- OFF
- ACC
- Electrically heated rear window, 4D
- Electrically heated rear window, CV
- Radio reception, 4D/5D
- Bus messages, ACC
- Heating element, rear window (115)
- Temperature sensor, mixed air, floor, left (217LH)
- Temperature sensor, mixed air, floor, right (217RH)
- Temperature sensor, cabin air (218)
- Control unit, ventilation fan, ACC (220b)
- Motor, air-mixing damper, left (222LH)
- Motor, air mixing damper, right (222RH)
- Sun sensor (223)
- Temperature sensor, outdoor air (286)
- Front dome light unit (685F)
- Temperature sensor, mixed air, panel, left (712LH)
- Temperature sensor, mixed air, panel, right (712RH)
- Motor, air distribution, defroster (714)
- Motor, air distribution, floor (715)
- Motor, air distribution, panel, right (716RH)
- Connector H8-2
- Connector H10-1
- Connector H18-1
- Connector H24-1
- Connector H102-1
- Crimp connection J176, climate control unit
- Direct current motor, air recirculation flap (38)
- Mixed air temperature sensor, RH floor (217RH)
- Ventilation fan control (220b)
- Left mixed air stepping motor (222LH)
- Right mixed air stepping motor (222RH)
- Defrost air distribution flap stepping motor (714)
- Floor air distribution flap stepping motor (715)
- Right panel, air distribution flap stepping motor (716RH)
- SPS programming
- Add
- Actions when replacing electrical components
- Internal control module faults
- Analog inputs
- Digital inputs
- Outputs
- Adjusting the boot lid
- Adjusting the soft top cover
- Adjusting the soft top
- Adjusting the doors, windows and seals
- Adjusting the soft top and first bow lock hooks
- Upward/downward, forward/backward
- Removing
- To fit — Part 1
- To fit — Part 2
- Rear rail/sixth bow seal
- Reinforcing bow
- Emergency closing
- Emergency opening
- Cleaning
- Soft top sequences, opening and closing of soft top, hydraulic functions
- Step 1, opening the sixth bow
- Step 2, releasing first bow and opening soft top cover
- Step 3, sixth bow, intermediate position
- Step 4, lowering the soft top
- Step 5, locking the soft top cover
- Step 1, opening the soft top cover
- Step 2, raising the soft top
- Step 3, opening the sixth bow
- Step 4, locking the first bow and closing the soft top cover
- Step 5, closing the sixth bow
- Pump unit
- Valves
- Electro-Hydraulic System
- Soft Top Sequences, Opening the Soft Top, Sensor Inputs
- SID, text messages
- Main task
- Type
- Connection
- Connect
- List of components
- Connected components
- Position sensor, soft top cover locked, LH (562LH)
- Position sensor, soft top cover locked, RH (562RH)
- Position sensor, soft top lowered (562o)
- Position Sensor, Soft Top Bag Down (564)
- Position sensor, soft top raised (577c)
- Position sensor, soft top lowered (577o)
- Position sensor, sixth bow locked, LH (578LH)
- Position sensor, sixth bow locked, RH (578RH)
- Position sensor, sixth bow raised (578u)
- Soft top
- General
- Bus
- Control module
- Outputs
- Inputs
- SPS programming
- Add
- Internal control module faults
- Analog inputs
- Digital inputs
- Background
- Conditions
- Procedure
- Cars affected
- Coolant Freezing Point and Level
- Checks
- To Fit
- Bleeding
- Expansion Tank
- Procedures After Disconnecting the Battery
- Idle Speed Compensation
- Current Consumption
- Main Task
- Connection
- Type
- Function
- Connect
- List of Components
- Radiator Fan Motor (37)
- Left Radiator Fan Motor (37LH)
- Right Radiator Fan Motor (37RH)
- Coolant Temperature Sensor (202)
- Z18XE
- Z19DT
- Z19DTH
- Automatic Climate Control (216)
- Motor, Fuel Pump, Auxiliary/Parking Heater (323a)
- Relays
- Control Panel, Manual Climate Control (504)
- SID (541)
- Control Module, Trionic, B207, Switch A (589A)
- Control Module, Trionic, B207, Switch B (589B)
- Auxiliary/Parking Heater (597)
- Relay Unit, Radiator Fans (706a)
- Radiator Fan Relay Unit (706b)
- Body Control Module (707)
- Accessory Connector (711)
- Infotainment Control Panel (736)
- SID Control Panel (737)
- Connector H27-1
- Connected Components
- Power Train
- Coolant
- Radiator Fan Motor (37), B207
- Radiator Fan Motor (37LH, 37RH), B207
- Relay Unit, Radiator Fan (706a), B207
- Current Values
- Radiator Fan Relay Unit (706b), B207
- Removing
- Fitting
- To fit — Part 1
- To fit — Part 2
- Procedures after disconnecting the battery
- Procedure
- Programming the key
- Bonnet
- Tailgate
- General
- TSL
- Low battery voltage
- Remote control
- Remote receiver
- Comfort closing/opening
- Remote control not in the ignition switch
- Remote control in the ignition
- Locking logic for boot lid
- Central locking system, bus information
- Main task
- Type
- Connect
- Emergency opening handle 4D US/CA
- Switch
- Electric motor
- Switches
- LHD
- RHD
- Motor
- Power supply, ground and bus communication
- Main purpose
- List of components
- Switch, driver's door (54D)
- Switch, passenger door (54P)
- Connector, boot lid (54H)
- Switch, left rear door (54RL)
- Switch, right rear door (54RR)
- Motor, central locking system, driver's door (184D)
- Motor, central locking system, passenger door (184P)
- Bootlid central locking system motor (184H)
- Central locking system motor, left rear door (184RL)
- Central locking system motor, right rear door (184RR)
- Bootlid switch (388)
- Filler flap solenoid, central locking system (434a)
- Driver's door switch for simultaneous central locking (514D)
- Passenger door switch for simultaneous central locking (514P)
- SID (541)
- Bootlid lock microswitch (622)
- Unit, central locking system, driver's door (687D)
- Unit, central locking system, passenger (687P)
- Bootlid central locking system module, (687H)
- Unit, central locking system, left rear door (687RL)
- Unit, central locking system, right rear door (687RR)
- Bootlid handle module (691)
- Fuses
- Control module, door, front, left-hand (702)
- SOP - Rev.1 (702D)
- From and including Rev.1 (702D/P)
- Control Module, door, Front, Right-hand (702)
- SOP - Rev.1 (702P)
- From and including Rev.1 (702P/D)
- Control module, rear left door (702RL)
- Control module, rear right door (702RR)
- Body Control Module (707)
- Bootlid opening motor relay (710)
- Connector H4-1
- Connector H4-5
- Connector H8-3
- Connector H8-6
- Connector H8-7
- Connector H8-10
- Connector H8-12
- Connector H8-17
- Connector H10-6
- Connector H10-18
- Connector H13-1
- Connector H13-2
- Connector H16-1
- Connector H16-2
- Connector H102-1
- Component list
- Crimp J321, tailgate 5D
- Connected components
- Grounding Point G29
- Connected components 5D
- Solenoid, fuel filler flap lock (434a)
- Remember
- J1
- J2
- Scope
- Bus
- Control module
- Outputs
- Inputs
- SPS programming
- Add
- Actions when replacing electrical components
- Internal control module faults
- Analog inputs
- Digital inputs
- The ignition key cannot be turned to the LOCK position
- Background
- Conditions
- Parts required
- Materials
- Power Door Locks
- Electric opening of boot lid lock 4D
- Electric opening of boot lid lock CV
- To fit
- Infotainment control panel, ICM (736)
- General, ICM
- Reprogramming ICM 2
- Reprogramming
- Reprogramming ICM 3
- The OCP processor - Navigation and telephone software
- CD with OCP software
- Reprogramming CU
- DSP processor - Language software
- Reprogramming CU-GSM
- Reprogramming CU-AMPS
- Programming the speedometer
- Odometer/tripmeter
- Main instrument unit display
- Functions in SID
- Functions in SIDC (SID control panel)
- Service
- Warning and indicator messages
- Engine and gearbox
- Charging systems
- Lighting and signalling system
- Wash/wipe systems
- Saab Park Assistance (SPA)
- Seat belt system
- Airbag system
- Theft protection, doors and locks
- Brakes
- Tires (certain markets)
- Others
- INFO knob
- CUSTOMIZE button
- CLEAR button
- ESP or TCS button
- Extra equipment
- Brightness control (rheostat function)
- Night panel
- SIDC (SID controls), CV
- Soft top down
- Soft top up
- Indicator lamps for passenger airbag in SIDC, certain markets
- Language
- Units
- Button and display lighting, bus information
- Speedometer, bus information
- Odometer, bus information
- Tachometer, bus information
- Coolant temperature, bus information
- Fuel gauge, bus information
- Turbo boost gauge, bus information
- Warning and indicator lights, bus information
- SID display and buttons, bus information
- Type
- Principal use
- Main task
- Connection
- Connect
- List of components
- Connected components
- Control panel SID
- ICM control panel
- Main instrument unit, MIU (540)
- Remember
- General
- Bus
- Control module
- Outputs
- Inputs
- SPS programming
- Add
- Internal control module faults
- Analog inputs
- Digital inputs
- Actions when replacing electrical components
- Conditions
- Track Rod
- The action involves the following
- SPS programming
- Add
- Procedures After Disconnecting The Battery
- Steering Angle Sensor, Changing (EHPS)
- EHPS Hydraulic System, Filling And Bleeding
- EHPS Control Module
- Power Steering Unit, Z18XE
- Power Steering Unit, Z19
- Power Steering Delivery Pipe, LHD
- To fit
- Power Steering Return Pipe, LHD
- Power Steering Pipe, RHD
- Main task
- Type
- Pump unit
- Electric motor
- Connection
- Bus Messages
- Main use
- Steering wheel angle sensor
- Power supply, ground and bus communication
- Steering gear
- Connect
- Relays
- List of components
- Power Steering System Unit (745)
- Z18XE
- Z19
- Steering Wheel Angle Sensor, Power Steering (747)
- Connected components
- Pump
- Control module
- To fit
- Control module, ME9 (608)
- Generator (2)
- Brake light switch (29)
- Relay, fuel pump (102)
- Clutch switch, cruise control (133)
- Brake switch, cruise control (134)
- Relay, A/C compressor (156)
- Boost pressure control valve (179a)
- Temperature sensor, coolant, engine management system (202)
- Mass air flow sensor (205)
- Injectors (206a-f)
- Main relay, engine management system (229)
- Level sensor, engine oil (243)
- Ignition coil with integrated power amplifier (320a-f)
- Solenoid valve, EVAP canister purge (321)
- Relay, secondary air injection pump (324)
- Crankshaft position sensor (345)
- Accelerator pedal position sensor (379)
- Knock sensor, front cylinder bank (516F)
- Knock sensor, rear cylinder bank (516R)
- Relay, +50 (517)
- Atmospheric pressure sensor (539)
- Position sensor, intake camshaft, front cylinder bank (555F)
- Position sensor, intake camshaft, rear cylinder bank (555R)
- Manifold absolute pressure sensor (585)
- Solenoid valve, shut-off EVAP (588)
- Preheated oxygen sensor, front (592)
- Preheated oxygen sensor, rear (593)
- Throttle body actuator unit (604)
- Solenoid valve, turbo by-pass (605)
- A/C pressure sensor (620)
- Fuel pressure sensor, fuel rail (653)
- Intake air sensor (688)
- Fuel pump unit (689)
- Solenoid valve, intake camshaft, front cylinder bank (695F)
- Solenoid valve, intake camshaft, rear cylinder bank (695R)
- Engine oil pressure sensor (696)
- Control module, fuel pump (697)
- CIM (703)
- Relay unit, radiator fans (706a)
- General
- Function
- Adaptation of pedal position
- TCS/ESP request, general
- Compensation, A/C
- Compensation, generator
- Engine protection function
- Brake
- Safety-related fault in throttle control
- Misfiring
- Emission limitation
- Active surge dampening
- Maximum permissible vehicle speed
- Throttle control, principle
- CVCP control
- Fuel mass per combustion
- Injector opening time
- Injection twice/combustion
- Needle lift compensation
- Fuel shut-off
- Optimization
- Basic matrix for idling speed ignition timing, principle
- Temperature correction of idling speed ignition timing, principle
- Correction, coolant temperature dependent
- Correction, charge air temperature dependent
- Final ignition timing
- Detection
- Adaption
- Vehicle speed below requested
- Vehicle speed above requested
- Conditions for activation
- Switch positions
- Setting the desired speed
- Increasing the set speed
- To decrease the set speed
- Temporary speed increase
- Disengage temporarily
- Re-engaging
- Disengaging
- Main task
- Type
- Connection
- Ignition Switch Module (20)
- Connect
- List of components
- Charge air solenoid valve (179a)
- Z19DT
- Z19DTH
- Coolant temperature sensor (202)
- Z18XE
- Injector, cyl 1 (206a)
- Injector, cyl. 2 (206b)
- Injector, cyl. 3 (206c)
- Injector, cyl. 4 (206d)
- Injector, cyl 5 (206e)
- Injector, cyl 6 (206f)
- Main relay, engine control system (229)
- T8
- Simtec
- EDC16
- Engine oil level switch (243)
- Heated oxygen sensor element (271)
- Ignition coil with integrated power stage, cyl 1 (320a)
- Ignition coil with integrated power stage, cyl 2 (320b)
- Ignition coil with integrated power stage, cyl 3 (320c)
- Ignition coil with integrated power stage, cyl 4 (320d)
- Ignition coil with integrated power stage, cyl 5 (320e)
- Ignition coil with integrated power stage, cyl 6 (320f)
- Secondary air injection pump relay (324)
- Secondary air injection pump motor (326)
- Relays
- Intake air temperature sensor (407)
- Main instrument display panel (540)
- SID (541)
- Front heated oxygen sensor (592)
- Rear heated oxygen sensor (593)
- Charge air pressure sensor (603)
- Throttle body actuator (604)
- Solenoid valve, turbo bypass (605)
- Control module, Motronic E9, B284, switch A, engine (608A)
- Control module, Motronic E9, B284, switch B, (608B)
- Pressure sensor, engine oil (696)
- Fuses
- Connector H2-2
- Connector H7-1
- Connector H10-8
- Connector H24-6 (ME9)
- Connector H33-1
- Connector H102-1
- Connected components
- General data
- Connector, clutch, cruise control (133)
- Connector, brake, cruise control (134)
- Accelerator position sensor (379)
- Throttle motor
- Fuel level sensor (46), T8
- Transport
- SPS programming
- Add
- Procedures after disconnecting the battery
- Type of lamp illumination
- Conditions
- Engine Performance Diagnostic Routine Outline - General Information
- Engine Performance Safety Precautions
- Parasitic Load Explanation & Test Procedures - General Information 2
- Waveforms - Injector Pattern Tutorial - General Information 2
- Electrostatic Discharge Warning - General Information
- State Emission Standards - Diesel
- Bodywork on cars with airbag
- Checking body dimensions
- Procedure
- MIG brazing (EU)
- MIG brazing (not EU)
- Parts required
- Welding
- Symbols
- Grinding
- Welding galvanized sheet metal
- Cleaning
- Primer
- Sound insulation
- Background
- Protective equipment
- To fit
- Roof
- Roof, 5D
- A-pillar, upper section, complete, 4D/5D
- Outer A-pillar with reinforcement, 4D/5D
- A-pillar outer panel, CV
- Windscreen frame outer panel, CV
- Removing
- Fitting
- Wheel housing member
- Part of rear side plate, 5D, spare part complete side
- Part of side panel, 5D
- Part of rear side panel
- Outer sill
- B-pillar, spare part, complete side
- D-pillar, complete
- Rear bumper abutment
- Rear lamp panel, 5D
- Instructions
- Assistance for avoiding incorrect glue mixtures
- Hardening of mixed glue
- Advantages with body gluing
- Body design
- Impact safety
- Reinforcements
- High-strength steel
- Galvanized body parts
- Impact safety, 4D, 5D
- Side impact protection in the doors
- Impact safety protection
- Safety structure
- Front and rear-end collision
- Side impact
- Body dimensions, CV
- Measurements, body front, above
- Body measurements, under
- Lifting and attachment points
- Measurements, body above
- Blind rivet/panel thickness
- 30 15 500 Multipress pistol
- 30 21 011 Pressure cup gun
- 82 92 633 Drift, M4
- 82 92 641 Drift, M5
- 82 92 658 Drift, M6
- 82 92 666 Drift, M8
- 82 92 674 Drift, M10
- 82 92 682 Drift, M6 special
- 82 92 708 Nozzle, M5
- 82 92 716 Nozzle, M6
- 82 92 724 Nozzle, M8
- 82 92 732 Nozzle, M10
- 82 92 757 Locking pin
- 82 93 037 Wing guard
- 86 12 566 IR lamp, 110V
- Safety regulations
- Welding technique, general
- General thermoforming
- Material characteristics, types of damage and basis of decision
- Identifying plastics
- Types of damage
- Plastic code table
- Plastic codes, temperature and welding rod
- Surface treatment
- Corrosion
- Painting galvanized sheet
- Body colors
- Base solid paint with clear enamel
- Anti-corrosion products — Part 1
- Anti-corrosion products — Part 2
- Emblem, 4D, 5D
- Affixing 9-3 and engine variant emblem
- Affixing the Saab emblem
- Emblem, CV
- Front bumper shell
- Rear bumper shell, 4D, CV
- Rear bumper shell, 5D
- Front spoiler
- Spoiler, rear, 4D
- Spoiler, rear, 5D
- Grille
- Protective moldings
- Front and rear wing liners
- Emblem
- Fuel filler pipe
- Fuel filler pipe, hose
- To fit
- Checks
- Fuel tank
- Emptying the fuel tank
- Checking fuel pressure
- Fuel pressure regulator
- Fuel level sensor
- Fuel pump
- Fuel lines tank - engine bay
- Checking the fuel pressure regulator
- Checking residual pressure
- Fuel level sensor (46)
- Fuel pump relay (102)
- Main relay, engine control system (229)
- T8
- Simtec
- EDC16
- EVAP canister purge valve (321)
- Z18XE
- Motor, fuel pump (323)
- Heated oxygen sensor relay (443)
- Main instrument display panel (540)
- Pressure sensor, EVAP (585)
- EVAP shut-off solenoid valve (588)
- Control module, Trionic, B207, switch A (589A)
- Control module, Trionic, B207, switch B (589B)
- Fuel pump module (689)
- Main task
- Type
- Connect
- Fuses
- Relays
- List of components
- Diesel tank
- Connector H24-2 (T8)
- Connector H102-1
- Connected components
- Power train
- Injectors (206), T8
- Fuel level sensor US (46), T8
- Fuel level sensor (46), T8
- Check values
- Fuel Filler Pipe
- Fuel Filler Pipe, Hose
- To fit
- Fuel Pressure Sensor (653)
- Injectors (206A-F)
- Fuel Tank
- Checking Residual Pressure
- Checking Fuel Pressure
- Emptying the Fuel Tank
- Fuel Pump
- Fuel Lines Tank - Engine Bay
- Main task
- Type
- Connection
- Fuel Level Sensor (46)
- Fuel Pump Relay (102)
- Main Relay, Engine Control System (229)
- T8
- Simtec
- EDC16
- EVAP Canister Purge Valve (321)
- Z18XE
- Motor, Fuel Pump (323)
- Connect
- Relays
- List of Components
- Main Instrument Display Panel (540)
- Pressure Sensor, EVAP (585)
- EVAP Shut-Off Solenoid Valve (588)
- Control Module, Motronic E9, B284, Switch A, engine (608A)
- Control Module, Motronic E9, B284, Switch B, (608B)
- Fuel Pump Module (689)
- 4D/5D
- CV
- Fuses
- Connector H7-1
- Diesel Tank
- Connector H10-16
- Connector H24-6 (ME9)
- Connector H102-1
- Connected Components
- Power Train
- Fuel Level Sensor (46), T8
- Level Sensor, Fuel (46), B284
- General Data
- To fit — Part 1
- To fit — Part 2
- Procedure
- Preparations for first-time programming
- Programming for garage with fixed code
- Complete erase
- Identifying a garage door with rolling security code
- Gate programming and Canada programming
- Check procedure
- Background
- Protective equipment
- Windscreen and rear window, 4D
- Side windows
- Windscreen
- Rear window
- Changing zones
- Compensating for the car's magnetic field
- Cars with ACC
- Cars with MCC
- Electrically heated rear window, bus information
- Main task
- Type
- Electrically heated rear window, 4D
- Electrically heated rear window, CV
- Radio reception, 4D/5D
- Main purpose
- Connection
- General
- Window lifts, standard design
- Window lifts with "Express up"
- Electrically operated window lifts, bus information
- Electric motor
- Hall sensors
- Motor without pinch protection
- Motor with pinch protection
- Power supply, ground and bus communication
- Door mirrors, main components
- Mirror heating, general
- Phase 1
- Phase 2
- Phase 3
- Memory function, storing positions
- Tilt
- Folding in/out (option)
- Door mirrors, bus information
- Electric motor for mirror glass
- Potentiometers
- Electric motor for foldable door mirror
- Ignition key OFF
- Ignition key in LOCK position or removed
- For 20 seconds if
- Comfort function, bus information
- Connect
- List of components
- Left reversing light bulb (32HL)
- Relay, heated rear window (113)
- Heating element, rear window (115)
- Switch, electrically heated rear window (116)
- Switch, electrically adjustable door mirror (124)
- Motor, electrically adjustable door mirror, driver side (126D)
- Motor, electrically adjustable door mirror, passenger side (126P)
- Motor, electrically operated window lift, front, left-hand (164FL)
- Motor, electrically operated window lift, front, right-hand (164FR)
- Motor, electrically operated window lift, rear, left-hand (164RL)
- Motor, electrically operated window lift, rear, right-hand (164RR)
- Heating element, door mirror, FL (207)
- Heating element, door mirror, FR (207)
- Automatic Climate Control (216)
- Light cluster unit, boot lid, LH (418HL)
- Control panel, manual climate control (504)
- Motor, door mirror retraction, driver side (551D)
- Motor, door mirror retraction, passenger side (551P)
- Control module, window lift, rear, LH (575RL)
- Control module, window lift, rear, RH (575RR)
- Antenna amplifier, radio (624)
- Control module, ADM (637)
- Electro-chromatic layer, door mirrors (639)
- Filter, antenna ground (644)
- Door mirror, driver's side (680D)
- Door mirror, passenger (680P)
- Rearview mirror, interior (681)
- Fuses
- Control module, door, front, left-hand (702)
- SOP - Rev.1 (702D)
- From and including Rev.1 (702D/P)
- Control module, door, front, right-hand (702)
- SOP - Rev.1 (702P)
- From and including Rev.1 (702P/D)
- Control module, rear left door (702RL)
- Control module, rear right door (702RR)
- Body Control Module (707)
- Compass (713)
- Remote control, garage door opening (735)
- Connector H2-1
- Connector H2-4
- Connector H8-3
- Connector H8-6
- Connector H8-17
- Connector H10-6
- Connector H10-11
- Connector H10-12
- Connector H10-13
- Connector H10-14
- Connector H13-1
- Connector H13-2
- Connector H16-1
- Connector H16-2
- Connector H27-1
- Connector H102-1
- Component list
- Crimp J322, tailgate 5D
- Connected components
- Grounding point G29
- Connected components 5D
- Adhesive and primer used when changing window glass
- Heating element, door mirrors
- Garage door opening (GDO), US/CA
- Bus
- Control module
- Outputs
- Inputs
- SPS programming
- Add
- Actions when replacing electrical components
- Internal control module faults
- Analog inputs
- Digital inputs
- Max. force - Max. clamping force
- Position of max. force (mm) - Max. clamping force position (mm)
- Average force - Average clamping force value
- Force difference - Clamping force difference
- Force difference first 20 mm - Clamping force difference first 20 mm
- Cars affected
- Procedure M03
- Procedure M04-M06
- Conditions — Part 1
- Conditions — Part 2
- To dismantle
- To fit
- Fitting centering tool, subframe - engine
- Summary of lubricants and sealants
- Gearbox
- General
- First group FM57
- Second group B05
- Third group: A12345
- Gear ratio
- Speed
- Manual gearbox, clutch, drive shafts
- Packaging
- Transport
- Directives
- Checking and correcting the gearbox oil level
- Differential
- Gearbox gear ratios
- Gearbox oil and lubricants
- Topping up/changing gearbox oil B284
- Adjusting (after subframe is fitted to body)
- Power flow animation
- Basic design
- Mating face
- 4-gear differential
- List of lubricants and sealants
- F40 6 WR 335
- First group
- Second group
- Third group
- Fourth group
- 30 07 739 Hose pinch-off pliers
- 78 41 067 Sleeve, inner driver bearing
- 82 93 102 Extension, 500 mm, 3/8 square
- 83 90 114 Sleeve, 4th gear pinion
- 83 90 148 Sleeve
- 83 90 270 Sliding hammer
- 83 90 312 Drift, input shaft bearing race
- 83 94 801 Parent fixture
- 83 94 850 Lifting beam
- 83 95 188 Basic fixture
- 83 95 212 Strap
- 83 95 238 Wedge
- 83 95 287 Holder
- 83 95 311 Trolley lift
- 83 95 667 Pipe cutter/exhaust system
- 83 96 137 Centering tool, subframe - body
- 83 96 145 Centering fixture, subframe - engine
- 83 96 277 Centering drift clutch disc, 6-speed transmission
- 87 90 180 Pliers
- 87 90 297 Jaw
- 87 90 636 Fixture
- 87 90 685 Fitting tool, selector shaft seal
- 87 90 727 Bracket, dial gauge
- 87 90 800 Drift, differential bearing seal
- 87 91 121 Puller ring, 13 teeth
- 87 91 188 Support, for removing pinion shaft
- 87 91 196 Ring, bearing race
- 87 91 204 Sleeve, bearing race
- 87 91 220 Drift, selector rod bush
- 87 91 238 Drift, selector rod bush
- 87 91 261 Puller, pinion
- 87 91 287 Puller, 150 mm
- 87 91 303 Arm, 150 mm
- 87 91 410 Sleeve
- 87 91 428 Driver
- 87 91 642 Basic tool
- 87 91 659 Support
- 87 91 709 Clamp
- 87 91 717 Puller, internal ø = 56 mm
- 87 91 832 Puller, internal ø = 63 mm
- 87 91 972 Ring
- 87 92 913 Puller, 5th gear pinion
- 87 92 004 Puller ring, 21 teeth
- 87 92 053 Driver
- 87 92 061 Millimeter wheel, 27 mm
- 87 92 087 Mounting
- 87 92 095 Weight, differential bearing
- 87 92 129 Attachment eye, puller (x 2)
- 87 92 137 Bearing race, ground
- 87 92 152 Puller
- 87 92 160 Puller ring, 22 teeth
- 87 92 194 Dial gauge kit
- 87 92 202 Sleeve
- 87 92 228 Holder, transmission
- 87 92 343 Puller, differential bearing, 5th gear hub
- 87 92 335 Locking pin
- 87 92 475 Press sleeve, differential bearing
- 87 92 517 Holding tool, input shaft
- 87 92 566 Puller, 5th gear pinion
- 87 92 582 Fixture, 5th gear synchromesh hub
- 87 92 608 Holder for single-column lift
- 87 92 616 Removing tool, drive shafts
- 87 92 640 Tool, 5th gear synchromesh hub
- 87 92 657 Fitting drift, drive shaft seals
- 87 92 665 Protective plug, drive shaft hole
- 87 92 830 Puller ring, 12-gear manual gearbox
- 89 96 084 Puller, wheel hub
- To fit
- Refitting
- Control Module Use
- Text Messages
- Side objects
- Towbar
- Control module
- Mode
- Parking Assistance (SPA), Bus Information
- Principal use
- Type
- Power Supply, Ground and Bus Communication
- SID (541)
- 4D
- 5D
- CV
- Ultrasound Distance Sensor, Outer Left (631RL)
- Ultrasound Distance Sensor, Center Left (631RLC)
- Ultrasound Distance Sensor, Outer Right (631RR)
- Ultrasound Distance Sensor, Center Right (631RRC)
- Main task
- Connect
- Fuses
- List of Components
- Connector H8-5
- Connected Components
- Distance Sensor
- SPA Module
- Remember
- General
- Bus
- Outputs
- Inputs
- SPS programming
- Add
- On-Board Diagnostics
- Internal Control Module Faults
- Analog inputs
- Digital Inputs
- Actions When Replacing Electrical Components
- Power steering pump, B207 petrol engine
- Delivery line for power steering, B207 LHD
- Power steering delivery line, B207 RHD
- Delivery line for power steering, B284
- Power steering return line, B207 LHD
- Power steering return line, B207 RHD
- Power steering return line, B284 LHD
- Power steering return line, B284 RHD
- Steering gear, B284
- Steering gear, B207 LHD
- To fit
- Large servo request and low engine speed - B207 petrol engine
- Main task
- Type
- Connection
- Power steering pump, B284 engine
- Power steering pump, B207 engine
- Packaging
- Transport
- Directives
- Procedures after disconnecting the battery
- General Safety Instructions
- Inertia Reel With Activated Seat Belt Tensioner
- Seat Belt Reel With Tensioner, Front
- Rear Inertia Reel, 4D
- Front Seat Belts
- Rear Seat Belt
- Belt Tensioners
- Function
- Belt Buckle Sensor
- Airbag Warning Message
- Seat-Belt Warning
- Child Seats (Certain Markets Only)
- Main function
- Type
- Connection
- Main task
- Connect
- Belt Contact, Driver (70D)
- Belt Contact, Passenger (70P)
- Belt Tensioner, Driver (236D)
- Belt Tensioner, Passenger (236P)
- Belt Tensioner, Rear Seat, Driver's Side (236RD)
- Belt Tensioner, Rear Seat, Passenger Side (236RP)
- Occupied Seat Cushion Sensor, Passenger, Front (614P)
- Belt Contact (70D, 70P)
- Control Module
- Outputs
- Inputs
- General
- Bus
- SPS programming
- Add
- Actions When Replacing Electrical Components
- Analog Inputs
- Digital Inputs
- DSM
- Fitting
- Front seat
- To fit
- Removing
- Backrest upholstery, front seat
- Manual seat
- Changing Passenger Presence System, CV
- Main components
- SAHR (Saab Active Head Restraint)
- Electrically adjustable driver and passenger seat, 4D, 5D
- Function
- Electrically adjustable driver and passenger seat, CV
- Electrically operated driver's seat with memory function
- Memory function, storing the position
- Memory function, running to stored positions
- General
- Electrically adjustable seat
- Electrically adjustable seat with memory
- Lumbar support, CV
- Heated seat function car equipped with MCC
- Output setting 3, 1st press of the button
- Output setting 2, 2nd press of the button
- Output setting 1, 3rd press of the button
- Automatic control (selection using SIDC, CUSTOMIZE)
- High output at low outdoor temperature
- Manual selection from automatic control in AUTO
- Rear seat, 4D, 5D
- Child seat mounting
- ISOFIX mounting
- Main task
- Type
- Heating element
- Temperature sensor circuit
- Connect
- Connecting the seat
- Power supply, ground and bus communication
- DSM uses the following information
- DSM sends the following information
- Heating pad, seat (64A)
- Heating pad, backrest (64B)
- Automatic Climate Control (216)
- Temperature sensor, seat heating pad (254)
- Switch, power seat (357)
- Switch, electrically adjustable driver's seat with memory (357D)
- Memory switch, electrically operated driver's seat with memory (357Dj)
- Electrically adjustable driver's seat with memory control module (357Dk)
- Motor, hydraulic pump, lumbar support (357m)
- Switch, lumbar support (357o)
- Relay unit, seat, CV (357r)
- Valve, lumbar support (357v)
- Microswitch for backrest, folded down position (369f)
- Microswitch, access handle activated, seat (369r)
- Electrically adjustable seat relay (446)
- Control panel, manual climate control (504)
- Relay, electric heating, left seat (511FL)
- Relay, electric heating, right seat (511FR)
- SID (541)
- Fuses
- List of components
- Microswitch, backrest locked in upright position, rear seat left (741LH)
- Microswitch, backrest locked in upright position, rear seat right (741RH)
- Connector H2-7
- Connector H2-8
- Connector H3-2
- Connector H4-2
- Connector H8-14
- Connector H8-15
- Connector H8-17
- Connector H27-1
- Connector H40-1
- Connector H40-2
- Connector H102-1
- Connected components 5D
- Connected components
- Memory buttons (357Dj)
- Control module, seat (357k)
- Measurement value, control module connections, seat control module (357k/Dk)
- Remember
- 64-pin connector
- Control module
- Outputs
- Inputs
- Bus
- SPS programming
- Add
- Actions when replacing electrical components
- Procedures after disconnecting the battery
- Internal control module faults
- Analog inputs
- Digital inputs
- Procedure
- Conditions — Part 1
- Conditions — Part 2
- Ignition Switch Module, ISM
- Procedures after disconnecting the battery
- Starter motor
- Ignition switch
- Column Integration Module
- Engine control module
- Gear selector, automatic
- Starting interlock contact, clutch pedal
- Working circuit
- Operating circuit for manual gearbox
- Operating circuit for automatic transmission
- Start, bus information
- Starter motor (4)
- Z18XE
- Z19DT
- Z19DTH
- Ignition Switch Module (20)
- Main task
- Type
- Connect
- List of components
- Start inhibitor switch, automatic in 245 (77)
- Transmission range switch, automatic (245)
- Relays
- Switch, clutch, start immobilizer (411)
- TCM control module, AF40 (502b)
- Relay, +50 (517)
- SID (541)
- Control module, Trionic, B207, switch A (589A)
- EDC16 Control module, 4-cyl. diesel, connector B (595B)
- Control module, Motronic E9, B284, switch B, (608B)
- Control module, Simtec, Z18XE, switch B (705B)
- Steering Column Lock (708)
- Connector H4-3
- Connector H7-1
- Connector H10-2
- Connector H24-2 (T8)
- Connector H24-6 (ME9)
- Connector H33-1
- Connector H102-1
- Connected components
- General
- Bus
- Control module
- Outputs
- Inputs
- The ignition key cannot be turned to the LOCK position
- Procedure
- Conditions
- To fit
- +30 voltage
- +15 voltage
- Ground
- Switch
- Main task
- Type
- Power Supply, Ground and Bus Communication
- Connect
- Bus Messages, SRM
- SRM Uses the Following Information
- SRM Sends the Following Information
- List of Components
- Control Module, Door, Front, Left-Hand (702)
- SOP - Rev.1 (702D)
- From and Including Rev.1 (702D/P)
- Connector H4-4
- Connector H8-8
- Connected components
- 12-Pin Connector
- Control module
- Outputs
- Inputs
- General
- Bus
- The action involves the following
- SPS Programming
- Add
- Internal Control Module Faults
- Analog Inputs
- Digital Inputs
- Body Control Module (BCM) (707)
- Column Integration Module, CIM (703)
- To fit
- Ignition Switch Module, ISM
- Anti-theft alarm labels
- Programming the key
- Bonnet switch
- ATA 1 (Anti-Theft Alarm 1)
- ATA 3 (Anti-Theft Alarm 3)
- General
- Arming with the remote control
- Partial arming, arming with door/boot lid open
- Arming with theft alarm sensor disengaged
- Arming with open soft top
- Rearming after opening/closing the boot
- Rearming after inadvertently unlocking with remote control
- Disarming with the remote control
- Disarming with the transponder
- Indication of theft alarm status
- Panic alarm
- Locking the steering column
- Unlocking the steering column
- Control module in transport mode
- "Added" and "removed" control module
- New CIM (in transport mode)
- Used CIM (previously "added" or "removed")
- New ECM (in transport mode)
- Used ECM (previously "added" or "removed")
- New key (in transport mode)
- Used key (previously "added")
- Replacing ECM
- When using previously used keys (first choice)
- When using new keys (second choice)
- Replacing CIM with a used CIM
- Replacing ECM and CIM with new units
- Replacing ECM and CIM with used units
- Add keys
- Anti-theft alarm, bus information
- Main task
- Type
- Connection
- Principal use
- Connect
- Main use
- Steering wheel angle sensor
- Power supply, ground and bus communication
- Ignition Switch Module (20)
- Relay, +54 (21)
- List of components
- Front left direction indicator lamp (27FL)
- Front right direction indicator lamp (27FR)
- Rear left direction indicator bulb (27RL)
- Rear right direction indicator bulb (27RR)
- Left horn (40LH)
- Right horn (40RH)
- Switch, driver's door (54D)
- Switch, passenger door (54P)
- Connector, boot lid (54H)
- Switch, left rear door (54RL)
- Switch, right rear door (54RR)
- Horn relay (68)
- Left side direction indicator lamp (89LH)
- Right side direction indicator lamp (89RH)
- Siren, anti-theft alarm (275)
- Bonnet switch, anti-theft alarm (276)
- LED, anti-theft alarm (305)
- Relays
- SID (541)
- Unit, central locking system, driver's door (687D)
- Unit, central locking system, passenger (687P)
- Bootlid central locking system module, (687H)
- Unit, central locking system, left rear door (687RL)
- Unit, central locking system, right rear door (687RR)
- Theft alarm sensor (690)
- Control module, door, front, left-hand (702)
- SOP - Rev.1 (702D)
- From and including Rev.1 (702D/P)
- Control module, door, front, right-hand (702)
- SOP - Rev.1 (702P)
- From and including Rev.1 (702P/D)
- Control module, rear left door (702RL)
- Control module, rear right door (702RR)
- Body Control Module (707)
- Steering Column Lock (708)
- Interior lighting relay (717)
- Glass breakage loop, luggage compartment (765RC)
- Glass breakage loop, rear left (765RL)
- Glass breakage, rear right (765RR)
- Connector H4-1
- Connector H8-6
- Connector H8-7
- Connector H8-10
- Connector H8-12
- Connector H8-17
- Connector H10-6
- Connector H10-18
- Connector H13-1
- Connector H13-2
- Connector H16-1
- Connector H16-2
- Connector H18-1
- Connector H33-1
- Connector H102-1
- Component list
- Crimp J321, tailgate 5D
- Connected components
- Grounding point G29
- Connected components 5D
- Theft alarm sensor
- Siren
- Ignition switch
- Column integration module
- Bus
- Control module
- Outputs
- Inputs
- SPS programming
- Add
- Actions when replacing electrical components
- Internal control module faults
- Analog inputs
- Digital inputs
- Background
- Conditions
- Procedure
- Cause
- False alarm due to glass breakage coil
- Upper heated oxygen sensor (592)
- Lower heated oxygen sensor (593)
- Throttle body actuator unit (604)
- Accelerator pedal position sensor (379)
- Ignition coil with integrated power module (320)
- CDM (740)
- Atmospheric pressure sensor (539)
- Engine oil level sensor (243)
- Fuel level sensor (46)
- Relay, starting relay (517)
- Cooling fan control
- Generator (2)
- Engine oil pressure sensor (44)
- Pressure sensor, A/C (620)
- General
- Pedal request, general
- Function, pedal request
- Adaptation of pedal position
- Cruise control, general
- Cruise control, vehicle speed lower than requested
- Cruise control, vehicle speed higher than requested
- Cruise control, criteria for activation
- Switch positions
- Setting a speed
- Increasing the set speed
- Reducing the set speed
- Temporary speed increase
- Disengage temporarily
- Re-engaging
- Disengaging
- Idle speed control, general
- TCS/ESP limitation, general
- Manual gearbox
- Special mode
- Misfiring
- Brake
- Vehicle speed limitation
- Minimum load
- Dashpot
- Knock control, general
- Maximum engine speed
- Turbo speed limitation
- Charge air control fault
- Emission limitation
- Fuel adaptation, general
- Multiplicative adaptation
- Additive adaptation
- Starter motor cranking
- Injector opening duration
- Injection twice/combustion
- Needle lift delay
- Coolant temperature dependent compensation
- Principle, coolant temperature above 95°C
- Principle, coolant temperature below 95°C
- Charge air temperature dependent compensation
- Principle, high charge air temperature
- Principle, low charge air temperature
- Principle, increasing engine speed
- Principle, increasing load
- Optimization
- Knock control
- Principle, low coolant temperature
- Principle, high coolant temperature
- Ignition system, general
- Ignition
- Charging time, general
- Principle, voltage dependence
- Principle, engine speed dependence
- Combustion signals, synchronization
- Combustion signals, misfiring detection
- Knock detection
- The engine management system uses the following information
- The engine management system sends the following information
- Main task
- Type
- Connection
- Connection, petrol engine B207, B284
- Connection, Z18XE petrol engine
- Connection, Z19DT/DTH diesel engine
- Function
- Main use
- Power supply, ground and bus communication
- Principal use
- Steering wheel angle sensor
- Z18XE
- Z19DT
- Z19DTH
- Ignition Switch Module (20)
- Connect
- List of components
- Brake light switch (29)
- Engine oil pressure switch (44)
- Simtec
- EDC16 8V
- EDC16 16V
- Fuel pump relay (102)
- Clutch switch, cruise control (133)
- Brake switch, cruise control (134)
- Charge air solenoid valve (179a)
- Coolant temperature sensor (202)
- Mass air flow sensor (205)
- Injector, cyl 1 (206a)
- Injector, cyl. 2 (206b)
- Injector, cyl. 3 (206c)
- Injector, cyl. 4 (206d)
- Main relay, engine control system (229)
- EDC16
- Engine oil level switch (243)
- Heated oxygen sensor element (271)
- Ignition coil with integrated power stage, cyl 1 (320a)
- Ignition coil with integrated power stage, cyl 2 (320b)
- Ignition coil with integrated power stage, cyl 3 (320c)
- Ignition coil with integrated power stage, cyl 4 (320d)
- EVAP canister purge valve (321)
- Motor, fuel pump (323)
- Relays
- Crankshaft position sensor (345)
- Intake air temperature sensor (407)
- Pressure sensor, intake manifold (431)
- Heated oxygen sensor relay (443)
- Data link connector 16 pin, CARB (445)
- Relay, +50 (517)
- Main instrument display panel (540)
- SID (541)
- Pressure sensor, EVAP (585)
- EVAP shut-off solenoid valve (588)
- Control module, Trionic, B207, switch A (589A)
- Control module, Trionic, B207, switch B (589B)
- Front heated oxygen sensor (592)
- Rear heated oxygen sensor (593)
- Charge air pressure sensor (603)
- Throttle body actuator (604)
- Solenoid valve, turbo bypass (605)
- Intake air sensor (688)
- Fuel pump module (689)
- Fuses
- Infotainment control panel (736)
- SID control panel (737)
- Ionization Detection Module (740)
- Connector H8-9
- Connector H24-2 (T8)
- Connector H33-1
- Connector H102-1
- Connected components
- Control module, Trionic T8 (589)
- Fuel level sensor US (46), T8
- Fuel level sensor (46), T8
- Connector, clutch, cruise control (133)
- Connector, brake, cruise control (134)
- Spark plug (157)
- Injectors (206), T8
- Fuel pump motor (323), T8
- Crankshaft position sensor (345), T8
- Accelerator position sensor (379)
- Heated oxygen-sensor, rear (593)
- Throttle body actuator, T8 (604)
- Temperature sensor
- Absolute pressure sensor
- Power train
- Trionic 8, Mode 06
- Control module
- Outputs
- Inputs
- Trip
- Driving cycle
- Heating cycle
- Similar operating conditions
- Entry conditions
- Fault criteria
- Dependencies
- System reactions to a fault
- OK report
- Fault handling I, catalyst damaging misfiring
- Fault handling II, emission-related misfiring or fault in fuel system
- Fault handling III, other emission-related components and function
- The action involves the following
- SPS programming
- Add
- Bus
- Internal control module faults
- Analog inputs
- Digital inputs
- Procedures after disconnecting the battery
- Type of lamp illumination
- Criteria
- Procedure
- Conditions
- To fit
- Procedures after disconnecting the battery
- General
- Supercharging
- Twin scroll
- Turbo control at low loads
- Turbo control at high loads
- Wastegate valve
- Controlling the wastegate valve
- Accelerator depressed
- When the accelerator is released
- Diaphragm unit
- Boost pressure control valve (179a)
- Charge air solenoid valve (179a)
- Z19DT
- Z19DTH
- Solenoid valve, turbo bypass (605)
- Power train
- Engine management system Motronic E9
- List of components
- Changing the Clamps
- To Fit
- Service Position, Windscreen Wipers
- Low Speed (A)
- High Speed (B)
- Single Stroke
- Service Position
- Intermittent (D)
- End Position Contact
- Obstruction Protection
- Wipers Parked
- Function, Rain Sensor
- Function under different conditions
- Windscreen Wiper, Bus Information
- Function, Windscreen Washing
- Windscreen Wiping In Conjunction With Washing
- Windscreen Washer, Bus Information
- Headlight Washer, Bus Information
- Main Task
- Type
- Connection
- Windscreen Wiper Motor (62F)
- Motor, Rear Window Wiper (62R)
- Windscreen Wiper Relay (83)
- Relay, Rear Window Wiper (83a)
- Connect
- Relays
- List of Components
- SID (541)
- Rain Sensor (649)
- High Pressure Headlamp Pump Motor (668)
- Fuses
- Full/Half Speed Windscreen Wipers Relay (709)
- Connector H2-1
- Connector H10-18
- Crimp J322, Tailgate 5D
- Connected Components
- Grounding Point G29
- Connected Components 5D
- Constantly Connected Components
- Connected Components, LHD
- Connected Components, RHD
- Windscreen Wiper Motor
- Rear Window Wiper Motor
- Washer Pump, Headlamps
- Rear Window Washer Pump
- Rain Sensor
- General
- Bus
- Control module
- Outputs
- Inputs
- The action involves the following
- SPS Programming
- Add
- Actions When Replacing Electrical Components
- Internal Control Module Faults
- Analog Inputs
- Digital Inputs
- Conditions
- Windscreen Wipers
- Wash Systems Including Headlamp Washers
- Rear Window Wiper 5D