Power Mirrors: Other Saab 9-3 I

9-3

Check fuse No. 7. See WIRING DIAGRAMS . Ensure voltage is present at switch terminal No. 6 (Brown wire). Operate switch. Ensure voltage and ground supply are present at motor.

9-5

1. Check fuse "C", and fuses No. 11 and 27. See «WIRING DIAGRAMS»(ref-2902-S40910587402000041400000) . Ensure voltage is present at switch terminal No. 6 (Brown wire).
2. Operate switch. Check voltage supply to motor. If mirror does not operate as specified, check all connectors, wiring and grounds.

1. If fault is with left mirror, go to step 11 . If fault is with right mirror, disconnect 9-pin power mirror switch connector. Connect test light between positive battery voltage and 9-pin connector terminal No. 5 (Black wire). If test light comes on, go to next step. If test light does not come on, repair open circuit in Black wire.
2. Turn ignition on. Connect test light between ground and 9-pin connector terminal No. 6 (Violet wire). If test light comes on, go to next step. If test light does not come on, repair open circuit in Violet wire.
3. Disconnect power mirror motor connector. Connect test light between power mirror motor female connector terminals No. 6 (Blue wire) and No. 8 (Yellow wire). Connect jumper wire between power mirror switch 9-pin female connector terminals No. 6 (Violet wire) and No. 7 (Yellow wire). Connect jumper wire between power mirror switch female connector terminals No. 5 (Black wire) and No. 8 (Gray wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
4. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 6 (Violet wire) and No. 8 (Gray wire). Connect another jumper wire between connector terminals No. 5 (Black wire) and No. 7 (Yellow wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
5. Disconnect all jumper wires. Connect test light between power mirror motor female connector terminals No. 4 (Blue/Orange wire) and No. 8 (Yellow wire). Connect another jumper wire between switch female connector terminals No. 5 (Black wire) and No. 7 (Yellow wire). If test light does not come on, repair wiring as necessary. If test light comes on, connect jumper wire between switch female connector terminals No. 6 (Violet wire) and No. 9 (Green wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
6. Disconnect all jumper wires. Connect jumper wire between switch female connector terminals No. 5 (Black wire) and No. 9 (Green wire). Connect another jumper wire between terminals No. 6 (Violet wire) and No. 7 (Yellow wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
7. Disconnect all jumper wires. Reconnect motor connector. Connect jumper wire between wiper switch female connector terminals No. 6 (Violet wire) and No. 7 (Yellow wire). Connect another jumper wire between connector terminals No. 5 (Black wire) and No. 8 (Gray wire). If mirror moves upward, go to next step. If mirror does not move upward, repair wiring as necessary.
8. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 6 (Violet wire) and No. 8 (Gray wire). Connect another jumper wire between terminals No. 5 (Black wire) and No. 7 (Yellow wire). If power mirror moves downward, go to next step. If power mirror does not move downward, repair wiring as necessary.
9. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 5 (Black wire) and No. 9 (Green wire). Connect another jumper wire between terminals No. 6 (Violet wire) and No. 7 (Yellow wire). If power mirror moves inward, go to next step. If power mirror does not move inward, repair wiring as necessary.
10. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 6 (Violet wire) and No. 9 (Green wire). Connect another jumper wire between terminals No. 5 (Black wire) and No. 7 (Yellow wire). If power mirror moves outward, replace switch. If power mirror does not move outward, repair wiring as necessary. See «WIRING DIAGRAMS»(ref-2902-S40910587402000041400000) .
11. Disconnect 9-pin power mirror switch connector. Connect test light between positive battery voltage and 9-pin female connector terminal No. 5 (Black wire). If test light does not come on, repair open circuit in Black wire. If test light comes on, turn ignition on. Connect test light between ground and 9-pin connector terminal No. 6 (Violet wire). If test light comes on, go to next step. If test light does not come on, repair open circuit in Violet wire.
12. Disconnect power mirror motor connector. Connect test light between power mirror motor female connector terminals No. 6 (Blue wire) and No. 8 (Yellow wire). Connect jumper wire between power mirror switch 9-pin female connector terminals No. 6 (Violet wire) and No. 7 (Yellow wire). Connect another jumper wire between power mirror switch female connector terminals No. 5 (Black wire) and No. 1 (Pink wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
13. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 6 (Violet wire) and No. 1 (Pink wire). Connect another jumper wire between connector terminals No. 5 (Black wire) and No. 7 (Yellow wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
14. Disconnect all jumper wires. Connect test light between power mirror motor female connector terminals No. 4 (Blue/Black wire) and No. 8 (Yellow wire). Connect another jumper wire between switch female connector terminals No. 5 (Black wire) and No. 7 (Yellow wire). If test light does not come on, repair wiring as necessary. If test light comes on, connect jumper wire between switch female connector terminals No. 6 (Violet wire) and No. 2 (Gray/Black wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
15. Disconnect all jumper wires. Connect jumper wire between switch female connector terminals No. 5 (Black wire) and No. 2 (Gray/Black wire). Connect another jumper wire between terminals No. 6 (Violet wire) and No. 7 (Yellow wire). If test light comes on, go to next step. If test light does not come on, repair wiring as necessary.
16. Disconnect all jumper wires. Reconnect motor connector. Connect jumper wire between wiper switch female connector terminals No. 6 (Violet wire) and No. 7 (Yellow wire). Connect another jumper wire between connector terminals No. 5 (Black wire) and No. 1 (Pink wire). If mirror moves upward, go to next step. If mirror does not move upward, repair wiring as necessary.
17. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 6 (Violet wire) and No. 1 (Pink wire). Connect another jumper wire between terminals No. 5 (Black wire) and No. 7 (Yellow wire). If power mirror moves downward, go to next step. If power mirror does not move downward, repair wiring as necessary.
18. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 5 (Black wire) and No. 7 (Yellow wire). Connect another jumper wire between terminals No. 6 (Violet wire) and No. 2 (Gray/Black wire). If power mirror moves inward, go to next step. If power mirror does not move inward, repair wiring as necessary.
19. Disconnect all jumper wires. Connect jumper wire between power mirror switch female connector terminals No. 5 (Black wire) and No. 2 (Gray/Black wire). Connect another jumper wire between terminals No. 6 (Violet wire) and No. 7 (Yellow wire). If power mirror moves outward, replace switch. If power mirror does not move outward, repair wiring as necessary. See «WIRING DIAGRAMS»(ref-2902-S40910587402000041400000) .