INSPECTION
The following steps outline the dealer inspection procedure required every 5 years for vehicles covered under the terms of the Lifetime Powertrain Warranty. Refer to the appropriate warranty information for additional terms and coverages applicable to the Lifetime Powertrain Warranty.
- Lift the vehicle on a suitable hoist.
- Check all Powertrain components for leaks or physical damage. Note any concerns.
- Lower the vehicle and check the level and condition of the engine oil.
- Connect a diagnostic scan tool and check for any Diagnostic Trouble Codes (DTC).
Scheme 3
| 1 - SLING TYPE |
|---|
| 2 - WHEEL LIFT |
| 3 - FLAT BED |
A vehicle equipped with SAE approved sling-type towing equipment can be used to tow all vehicles. When towing a 4WD vehicle using a wheel-lift towing device, use tow dollies under the opposite end of the vehicle. A vehicle with flat-bed device can also be used to transport a disabled vehicle.
A wooden crossbeam may be required for proper connection when using the sling-type, front-end towing method.