Removal Procedure
- Use a small flat-bladed tool to release the switch assembly from the steering wheel.
- Disconnect the cruise switch electrical harness connector from the switch.
Installation Procedure
- Connect the switch electrical harness connector to the switch. Push in the connector until a click is heard and pull back to confirm a positive engagement.
- Insert the cruise switch into the steering wheel and gently apply pressure to fasten the switch in the opening.
Scheme 4
Scheme 4: Steering Wheel Control Switch Assembly Replacement (Torrent)
| Callout | Component Name |
|---|
| NOTE: Refer to Fastener Notice . Preliminary Procedure: Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement (Equinox) or Inflatable Restraint Steering Wheel Module Replacement (Torrent) . |
| 1 | Steering Wheel Control Assembly Screw Tighten: 2 N.m (18 lb in) |
| 2 | Steering Wheel Control Assembly |
| NOTE |
|---|
| Refer to Fastener Notice . |
Steering Wheel Control Switch Assembly Replacement (Torrent)
