Home ReviewsRefund
Home/Pontiac/Torrent/Pontiac Torrent I (2005-2009)/Repair manual/Memory Modules/Configurable Customer Control System: Other
Contents Wiring diagrams Section: Memory Modules All sections

Configurable Customer Control System: Other Pontiac Torrent I

Memory Modules ~510 words

Electrical Information Reference

  1. «Circuit Testing»(ref-275031-S01352341682007122600000)
  2. «Connector Repairs»(ref-275031-S10085307342007122600000)
  3. «Testing for Intermittent Conditions and Poor Connections»(ref-275031-S24367471382007122600000)
  4. «Wiring Repairs»(ref-275031-S25744209472007122600000)

Circuit/System Verification

Ignition ON, observe the scan tool SWC Bank 1 status while pressing and releasing the switches. The reading should be SW1-SW7 identifying the switch pressed and Idle when released.

Repair Procedures

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

  1. «Steering Wheel Control Switch Assembly Replacement (Equinox)»(ref-275039-S19731002172007122600000) or «Steering Wheel Control Switch Assembly Replacement (Torrent)»(ref-275039-S28237335212007122600000)
  2. «Control Module References»(ref-275033-S19313861122007122600000) for BCM replacement, setup and programming
  1. «Circuit Testing»(ref-275031-S01352341682007122600000)
  2. «Connector Repairs»(ref-275031-S10085307342007122600000)
  3. «Testing for Intermittent Conditions and Poor Connections»(ref-275031-S24367471382007122600000)
  4. «Wiring Repairs»(ref-275031-S25744209472007122600000)

Ignition ON, observe the scan tool SWC Bank 1 status while pressing and releasing the switches. The reading should be SW1-SW7 identifying the switch pressed and Idle when released.

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

  1. «Steering Wheel Control Switch Assembly Replacement (Equinox)»(ref-275039-S19731002172007122600000) or «Steering Wheel Control Switch Assembly Replacement (Torrent)»(ref-275039-S28237335212007122600000)
  2. «Control Module References»(ref-275033-S19313861122007122600000) for BCM replacement, setup and programming

Symptoms - Secondary and Configurable Customer Controls

IMPORTANTPerform the Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following conditions are true: There are no DTCs set. The control modules can communicate via the serial data link. Review the system operation in order to familiarize yourself with the system functions. Refer to Steering Wheel Controls Description and Operation .

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .

  1. «Circuit Testing»(ref-275031-S01352341682007122600000)
  2. «Connector Repairs»(ref-275031-S10085307342007122600000)
  3. «Testing for Intermittent Conditions and Poor Connections»(ref-275031-S24367471382007122600000)
  4. «Wiring Repairs»(ref-275031-S25744209472007122600000)

Ignition ON, observe the scan tool SWC Bank 1 status while pressing and releasing the switches. The reading should be SW1-SW7 identifying the switch pressed and Idle when released.

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

  1. «Steering Wheel Control Switch Assembly Replacement (Equinox)»(ref-275039-S19731002172007122600000) or «Steering Wheel Control Switch Assembly Replacement (Torrent)»(ref-275039-S28237335212007122600000)
  2. «Control Module References»(ref-275033-S19313861122007122600000) for Radio replacement, setup and programming
  1. «Circuit Testing»(ref-275031-S01352341682007122600000)
  2. «Connector Repairs»(ref-275031-S10085307342007122600000)
  3. «Testing for Intermittent Conditions and Poor Connections»(ref-275031-S24367471382007122600000)
  4. «Wiring Repairs»(ref-275031-S25744209472007122600000)

Ignition ON, observe the scan tool SWC Bank 1 status while pressing and releasing the switches. The reading should be SW1-SW7 identifying the switch pressed and Idle when released.

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

  1. «Steering Wheel Control Switch Assembly Replacement (Equinox)»(ref-275039-S19731002172007122600000) or «Steering Wheel Control Switch Assembly Replacement (Torrent)»(ref-275039-S28237335212007122600000)
  2. «Control Module References»(ref-275033-S19313861122007122600000) for Radio replacement, setup and programming

Enter Programming

To enter Programming with the Tech 2, perform the following actions

  1. Install the scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. Select the correct vehicle and model year.
  4. Select F1: Body Control Module
  5. Select F2: Special Functions
  6. Select F2: Personalization

Setting Options

Select an option with the UP/DOWN ARROW keys. The selected option will be highlighted. Use the SIDE TO SIDE ARROW keys to activate or deactivate the highlighted options, an ASTERISK will be displayed when an option has been ACTIVATED. Use the SOFT keys to save the selected options or use the EXIT key to leave the options unchanged. After all options have been selected press the SOFT key to continue.

The following is a list of the selectable options

  1. F0: Pre-alarm Option
  2. F1: CTD Operation
  3. F2: Door Lock Operation
  4. F3: Fob Feedback
  5. F4: Afterblow Option

Fob Feedback

Refer to Keyless Entry System Description and Operation for information.

Afterblow Option

Refer to SIR System Description and Operation for information.

More articles — Configurable Customer Control System