Special tools
[1] adjustment shims (-).1349-F
Removing
Remove
- The style covers (1)
- The upper radiator grille half-grilles (2)
- The scuttle grille (3)
Unclip the arcing stops (4)
Unscrew the locknut from the stop (5) and place the stop in the lowest possible position
Insert the shims [1] in the locating holes and support them
Remove the mountings (6)
Allow the bonnet lock to hang down (7)
Beside each adjustment stop (5) fix a ball of mastic approximately 30 mm thick, and stick a paper on the top of the ball
Each side: slacken the fasteners (8) (slightly re-tighten to adjust the bonnet)
Unclip the bonnet struts (9) and fold them down
Part close the bonnet gently, supporting it on the shims [1]
Adjust the bonnet (fits and clearances)
A = 3,28 ± 1,7 mm
B = 2,3 ± 2,0 mm
C = 2,3 ± 2,8 mm
Open the bonnet: tighten the fastenings (8) and the stops (5)
Refitting
Proceed in the reverse order to removal
Adjust the bonnet lock by several successive opening and closing manoeuvres
Check the strength of the closed bonnet, which should still be tensioned
Tightening of the bolts (6) to 0.8 ± 0.2 m.daN