Remove
- 1. Open bonnet
- 2. Disconnect battery.
- 3. Detach sunlight sensor • Unclip sensor (1) from windscreen air duct panel
- 4. Detach sunlight sensor wiring harness plug • Release wiring harness plug (2) and isolate electrically
Install
- 5. Attach wiring harness plug to new sunlight sensor • Establish electrical connection to wiring harness plug
- 6. Attach sunlight sensor • Clip sensor into windscreen air duct panel
- 7. Connect battery.
- 8. Close bonnet
- 9. Carry out a function check
- 10. Program volatile memories