Required are:
- New (not programmed) keys and original keys
- Programmed Body Control Module
Important: In case of a lost/stolen key, in interest of safety, reprogram the remaining keys by just following the program sequence. Afterwards the lost/stolen key cannot be recognized anymore.
Select Tech-2 function: “Program Transponder-Keys” and follow the instructions on Tech-2.
If during programming errors occur see “Troubleshooting — Vivaro” .
If afterwards the system malfunctions, see “LED Status — Vivaro” .
Note. All keys, new and original, have to be programmed during one single session. Otherwise the original keys are not recognized after programming the new key.