B-05, F7: Programming Test Step T02 Program R-Key — Electrical Equipment and Instruments — Central Door Locking System

B-05, F7: Programming Test Step T02 Program R-Key Opel Omega B

B-05, F7: PROGRAMMING
Test	Work Order Description	Nominal Value
T02	Tester Display PROGRAM R-KEY
	This mode can be used to read the car key codes of the car keys and store them in the memory of the control unit. This programming function must be repeated once for every car key. Ignition ON Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with YES. Follow the instructions in the diagnostic tester display. Hold car key to be programmed close to receiver and press left button several times. After programming successfully, the anti theft warning system/central door locking system is locked/unlocked once.
	If the following displays appear during the test, car key programming has been completed successfully: Note: To store the programming into the control unit, the key has to be removed once from the ignition lock at the end of the programming.	R-KEY PROGRAMMED SEE CHECKING PROCEDURE
	Concerned Terminals: -
	Yes: T03	No: C-04

B-05, F7: Programming Test Step T02 Program R-Key Opel Omega B