| KM-470-B | Angular Torque Wrench |
|---|---|
| For use in tightening all bolted connections with angle-specific torque information. |
| KM-507-C | Remover |
|---|---|
| Press tie rod joint out of steering knuckle |
| CH-47658 | Clamping tool |
|---|---|
| For clamping the tie rod ends when unscrewing and screwing in the fastening nuts |
| MKM-610 | Torque wrench |
|---|---|
| Range: 30 - 130 Nm | |
| For use in tightening all bolted connections with torque |
| MKM-611 | Torque wrench |
|---|---|
| Range: 10 - 60 Nm | |
| For use in tightening all bolted connections with torque |
| MKM-883-1 | Engine Bridge |
|---|---|
| Hold/lower/raise the engine in conjunction with MKM-883-7 during removal of front axle body |
| MKM-883-7 | Adapter unit for MKM-883-1 |
| KM-904 | Base Frame |
|---|---|
| Removal and installation of front axle body using KM-6168 and KM-6169 |
| KM-6168 | Centring Equipment |
|---|---|
| Removal and installation of front axle body in conjunction with KM-904 and KM-6169 |
| KM-6169 | Engine/Transmission Mount |
|---|---|
| For positioning the engine/gear unit during removal and installation of the front axle body in conjunction with KM-904 and KM-6168 |
| KM-6247 | Tie rod remover / installer |
|---|---|
| Removal and installation of tie rod from/on steering gear steering rack |
| KM-6181 | Pin |
|---|---|
| For engaging the length adjustment of the steering intermediate shaft during removal and installation of the front axle body |
| MKM-J-6459-B | Torque wrench |
|---|---|
| Range: 0 - 11 Nm | |
| For use when tightening all bolted connections |
| MKM-J-22610 | Pliers |
|---|---|
| Tightening of folding cover retaining straps |
